Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jonas Gorski 30352e72ff base-files: set pi_ifname in board.d case to fix deconfig Due to an empty pi_ifname in the generic failsafe setup, the deconfig never removed the failsafe networking interface, causing broken networking later on. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>		2016-08-14 23:10:17 +02:00
config	apm821xx: use lzma compression for the initramfs images	2016-07-25 10:38:11 +02:00
docs
include	kernel: check SOURCE_DATE_EPOCH before setting KBUILD_BUILD_TIMESTAMP	2016-08-13 15:49:26 +02:00
package	base-files: set pi_ifname in board.d case to fix deconfig	2016-08-14 23:10:17 +02:00
scripts	kernel: add plan 9 fs package	2016-08-11 10:45:33 +02:00
target	mvebu: rework ClearFog bundle.tar.gz generation	2016-08-14 19:47:51 +02:00
toolchain	gcc: optionally build gccgo compiler	2016-08-11 10:45:33 +02:00
tools	tools: make_ext4fs: switch to LEDE git mirror	2016-08-14 22:34:47 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds: switch from github to lede-project.org mirrors	2016-08-01 22:34:18 +02:00
LICENSE
Makefile	build: move merged package directory from bin/ to staging_dir	2016-08-03 12:22:18 +02:00
README
rules.mk	build: add checksum target	2016-08-01 18:11:21 +02:00

README

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org