Openwrt/target/linux/ath79/patches-4.19/0032-MIPS-ath79-sanitize-symbols.patch
Chuanhong Guo 3771176c9e ath79: add support for linux 4.19
The following patches are dropped because they are merged upstream:
-0001-tty-serial-drop-QCA-pecific-SoC-symbols.patch
-0006-usb-drop-deprecated-symbols.patch
-0009-MIPS-ath79-add-lots-of-missing-registers.patch
-0010-MIPS-ath79-add-support-for-QCA953x-QCA956x-TP9343.patch
-0014-MIPS-ath79-finetune-cpu-overrides.patch
-0015-MIPS-ath79-enable-uart-during-early_prink.patch
-0016-MIPS-ath79-get-PCIe-controller-out-of-reset.patch

This patch is dropped due to the introduction of spi-mem framework:
-461-spi-ath79-add-fast-flash-read.patch

Thank to Michael Marley @mamarley for his work on this patch:
-910-unaligned_access_hacks.patch

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
[synchronized kernel config with make kernel_oldconfig]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-03-24 01:44:25 +01:00

94 lines
2.2 KiB
Diff

From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Sat, 23 Jun 2018 15:16:55 +0200
Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
We no longer need to select which SoCs are supported as the whole arch
code is always built. So lets drop all the SoC symbols
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/mips/Kconfig | 2 ++
arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
arch/mips/pci/Makefile | 2 +-
3 files changed, 8 insertions(+), 40 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -208,6 +208,8 @@ config ATH79
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART_PROM
+ select HW_HAS_PCI
+ select USB_ARCH_HAS_EHCI
select USE_OF
select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
help
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1,48 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
if ATH79
-config SOC_AR71XX
- select HW_HAS_PCI
- def_bool n
-
-config SOC_AR724X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_AR913X
- def_bool n
-
-config SOC_AR933X
- def_bool n
-
-config SOC_AR934X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_QCA955X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
+config PCI_AR71XX
+ bool "PCI support for AR7100 type SoCs"
+ depends on PCI
def_bool n
config PCI_AR724X
- def_bool n
-
-config ATH79_DEV_GPIO_BUTTONS
- def_bool n
-
-config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-config ATH79_DEV_SPI
- def_bool n
-
-config ATH79_DEV_USB
- def_bool n
-
-config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+ bool "PCI support for AR724x type SoCs"
+ depends on PCI
def_bool n
endif
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
#