Openwrt/target/linux/brcm63xx/patches-3.14/563-board_VR-3025un.patch
Jonas Gorski b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00

80 lines
1.9 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1976,6 +1976,60 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata vr3025un_fixups[] = {
+ { .offset = 97, .value = 0xfeb3 },
+ { .offset = 98, .value = 0x1618 },
+ { .offset = 99, .value = 0xfab0 },
+ { .offset = 113, .value = 0xfed1 },
+ { .offset = 114, .value = 0x1609 },
+ { .offset = 115, .value = 0xfad9 },
+};
+
+static struct board_info __initdata board_VR3025un = {
+ .name = "96368M-1341N",
+ .expected_cpu_id = 0x6368,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+
+ .has_enetsw = 1,
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43222,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = vr3025un_fixups,
+ .num_board_fixups = ARRAY_SIZE(vr3025un_fixups),
+ },
+};
+
static struct b53_platform_data WAP5813n_b53_pdata = {
.alias = "eth0",
};
@@ -2414,6 +2468,7 @@ static const struct board_info __initcon
&board_96368mvwg,
&board_96368mvngr,
&board_VR3025u,
+ &board_VR3025un,
&board_WAP5813n,
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
@@ -2497,6 +2552,7 @@ static struct of_device_id const bcm963x
{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },
{ .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, },
+ { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, },
{ .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, },
#endif
#ifdef CONFIG_BCM63XX_CPU_63268