Openwrt/target/linux/brcm63xx/patches-3.14/557-board_bcm963269bhr.patch
Jonas Gorski b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00

89 lines
1.5 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1906,6 +1906,75 @@ static struct board_info __initdata boar
#endif /* CONFIG_BCM63XX_CPU_6368 */
/*
+ * known 63268/63269 boards
+ */
+#ifdef CONFIG_BCM63XX_CPU_63268
+static struct board_info __initdata board_963269bhr = {
+ .name = "963269BHR",
+ .expected_cpu_id = 0x63268,
+
+ .has_uart0 = 1,
+
+ .has_pci = 1,
+
+ .has_ehci0 = 1,
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "port1",
+ },
+
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "port2",
+ },
+
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "port3",
+ },
+
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "port4",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "963629BHR:green:usb1",
+ .gpio = 9,
+ .active_low = 1,
+ },
+ {
+ .name = "963629BHR:green:usb2",
+ .gpio = 10,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 32,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+#endif /* CONFIG_BCM63XX_CPU_63268 */
+
+/*
* all boards
*/
static const struct board_info __initconst *bcm963xx_boards[] = {
@@ -1986,6 +2055,9 @@ static const struct board_info __initcon
&board_96368mvwg,
&board_96368mvngr,
#endif
+#ifdef CONFIG_BCM63XX_CPU_63268
+ &board_963269bhr,
+#endif
};
static struct of_device_id const bcm963xx_boards_dt[] = {