Openwrt/package/boot
David Bauer 7f187229a8 ipq40xx: add support for AVM FRITZ!Repeater 1200
Hardware
--------
SoC:   Qualcomm IPQ4019
RAM:   256M DDR3
FLASH: 128M NAND
WiFi:  2T2R IPQ4019 bgn
       2T2R IPQ4019 a/n/ac
ETH:   Atheros AR8033 RGMII PHY
BTN:   1x Connect (WPS)
LED:   Power (green/red/yellow)

Installation
------------

1. Grab the uboot for the Device from the 'u-boot-fritz1200'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz1200.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ1200.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz1200.bin uboot0
   > mtd write /path/to/uboot-fritz1200.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-23 01:17:28 +02:00
..
apex
arm-trusted-firmware-sunxi
at91bootstrap
fconfig
grub2 grub2: fix a build regression on non-linux systems 2019-10-02 13:16:21 +02:00
imx-bootlets
kexec-tools
kobs-ng
rbcfg
tfa-layerscape
uboot-ar71xx
uboot-at91
uboot-envtools uboot-envtools: remove erasesize from MMC config 2019-10-21 12:28:03 +02:00
uboot-fritz4040 ipq40xx: add support for AVM FRITZ!Repeater 1200 2019-10-23 01:17:28 +02:00
uboot-imx6
uboot-kirkwood
uboot-lantiq
uboot-layerscape
uboot-mvebu
uboot-mxs
uboot-omap
uboot-oxnas uboot-oxnas: remove unnecessary execute permission bit 2019-10-12 23:37:00 +02:00
uboot-sunxi sunxi: Add support for Banana Pi M2 Ultra 2019-09-21 01:12:35 +02:00
uboot-tegra
uboot-zynq