Openwrt

Openwrt build for Asrock G10 Router

Go to file

Michael Büsch 2b71a6167f bcm47xx: Fix EHCI/OHCI dependencies SVN-Revision: 17536		2009-09-06 21:15:12 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	now that $(BOARD) is part of the opkg ARCH, there's no reason to keep the board name around in kmod-* package versions anymore	2009-09-06 17:26:37 +00:00
package	move ppp ifname fixup from pppoe.sh to ppp.sh, so that it applies to all other ppp based protocols as well	2009-09-06 17:36:01 +00:00
scripts	scripts/feeds: fix an error message	2009-08-31 14:28:24 +00:00
target	bcm47xx: Fix EHCI/OHCI dependencies	2009-09-06 21:15:12 +00:00
toolchain	uclibc: to rebuild libc.so.0, mklibs.py needs access to libc_so.a which was not exported by default. use it instead of libc_pic.a	2009-08-29 11:56:27 +00:00
tools	build fixes for squashfs4 on cygwin	2009-08-27 19:47:13 +00:00
.gitignore
BSDmakefile
Config.in	do not forcibly disable stripping when selecting CONFIG_DEBUG, debugging symbols can be useful even if they are not put on the device (e.g. remote cross-gdb)	2009-09-06 19:56:54 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE
Makefile
README
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org