Openwrt build for Asrock G10 Router
Go to file
John Crispin 290534c7af kernel: add dsa driver support
The Linux Distributed Switch Architecture drivers provide richer support than
the swconfig driver API in that each switch port gets its own interface which
allows protocols such as STP, LLDP, 802.1x etc.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 48713
2016-02-12 08:31:49 +00:00
config build: don't add -fno-plt for ARC 2016-02-07 13:29:16 +00:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include kernel: Revert "kernel: set root on NFS when enabled" 2016-02-11 03:05:29 +00:00
package kernel: add dsa driver support 2016-02-12 08:31:49 +00:00
scripts scripts/strip-kmod.sh: remove a few extra sections to slightly reduce kernel module size 2016-02-01 13:33:33 +00:00
target ar71xx: Support for Ubiquiti UniFi AP AC LITE 2016-02-12 08:31:32 +00:00
toolchain toolchain/gdb: update to 7.10.1 2016-02-12 08:31:06 +00:00
tools ar71xx: Added support for TL-WA801NDv3 2016-02-12 08:30:28 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile Makefile: set timezone to UTC 2016-01-28 22:42:18 +00:00
README
rules.mk rules.mk: add TARGET_INIT_PATH toplevel variables 2016-02-08 14:28:35 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org