Openwrt

Openwrt build for Asrock G10 Router

Go to file

Hauke Mehrtens 2693eab7fd brcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition Most of the bcm47xx devices use TRX format for storing kernel and some partition like Squashfs or JFFS2. This is pretty flexible solution, CFE (the bootloader) just writes (and later boots) TRX at some hardcoded place and paritions can vary in the size. However some devices don't use TRX format. Very recently we have discovered ZTE H218N that has kernel and rootfs partitions at some "random" places. This patch allows Linux find a rootfs partition after installing custom image with a CFE bootloader. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 37998		2013-09-15 15:47:45 +00:00
docs
include	Fix IPv6 NAT breaking older kernels	2013-09-03 06:29:46 +00:00
package	hostapd: adjust the md5sum for the uploaded source tarball (fixes #14155 )	2013-09-14 20:07:35 +00:00
scripts	scripts/feeds: ensure that --ff is enabled	2013-09-02 18:25:10 +00:00
target	brcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition	2013-09-15 15:47:45 +00:00
toolchain	toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05	2013-09-11 14:29:44 +00:00
tools	tools/cmake: disable qt related checks to fix build issues	2013-09-07 18:33:07 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: enable MIPS16 again, but make it depend on !gcc-4.6	2013-09-10 14:40:06 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org