Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 2666403c3a ar8216: add reading ARL table for AR8216/AR8236/AR8316 Adds the chip-specific part of reading ARL table for AR8216/AR8236/AR8316. It's based on the AR8236 datasheet and compile-tested only as I couldn't find datasheets for AR8216/AR8316 and don't own devices with these chips. The existing ar8216_atu_flush implementation was used for all three chip types, therefore I guess they share a common ATU register layout. More testing would be appreciated. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 46379		2015-07-15 08:17:23 +00:00
config	hardening: disable user-space SSP for !musl	2015-06-29 16:44:27 +00:00
docs	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
include	build: Prevent more gzip timestamps	2015-07-14 09:57:45 +00:00
package	wpa-supplicant: add 802.11r client support	2015-07-15 08:16:22 +00:00
scripts	scripts/feeds: return error status from feed update	2015-07-14 22:27:39 +00:00
target	ar8216: add reading ARL table for AR8216/AR8236/AR8316	2015-07-15 08:17:23 +00:00
toolchain	toolchain: fix gcc 4.6 build with gcc5	2015-07-14 07:43:50 +00:00
tools	tools/e2fsprogs: add a darwin-compat patch	2015-07-15 08:16:40 +00:00
.gitattributes
.gitignore	build: add integration for managing opkg package feed keys	2015-04-06 19:39:51 +00:00
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile	Makefile: move the cleaning of staging_dir/target* from dirclean to clean	2015-06-14 17:47:16 +00:00
README
rules.mk	toolchain: only use fortify-headers for musl	2015-06-29 06:47:49 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org