Openwrt

Openwrt build for Asrock G10 Router

Go to file

Hauke Mehrtens 25afeba608 brcm47xx: add a new version of the nvram rewrite patch This is the version like it was send for mainline inclusion. SVN-Revision: 34988		2013-01-03 01:53:30 +00:00
docs	docs: update remaining references to functions.sh	2012-12-20 15:29:33 +00:00
include	cmake.mk: add support for overriding the source dir, and define the cmake prefix path to avoid picking up host libraries for target builds (patch by Henning Rogge)	2012-12-29 11:12:31 +00:00
package	brcm47xx: add a new version of the nvram rewrite patch	2013-01-03 01:53:30 +00:00
scripts	remove support for ubicom32	2012-11-30 10:53:55 +00:00
target	brcm47xx: add a new version of the nvram rewrite patch	2013-01-03 01:53:30 +00:00
toolchain	toolchain/musl: simplify musl install steps	2012-12-10 14:24:24 +00:00
tools	tools/ipkg-utils: remove some unnecessary field checks	2012-12-22 19:56:17 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: disable kernel export strip until it is fixed	2012-12-16 21:34:31 +00:00
feeds.conf.default
LICENSE
Makefile	build: it is no longer necessary to call make target/linux/clean as part of make clean	2012-12-02 15:26:28 +00:00
README
rules.mk	rules.mk: don't use $(realpath) in file_copy, the destination directory might not exist yet - spotted while doing a fresh build	2012-12-02 15:15:07 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org