04ad02d132
Compared to the "old" driver: - Each device must assign a pinctrl setting to the SPI node to allow the new SPI driver to configure the SPI pins. While here we are also using separate input and output settings so we are independent of whether the bootloader configures the pins correctly. - We use the new "compatible" strings to make the driver choose the correct number of chip-selects for each SoC. - The new driver starts counting the chip-selects at 1 (instead of 0, like the old one did). Thus we have to adjust the devices accordingly. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 48293
161 lines
2.7 KiB
Plaintext
161 lines
2.7 KiB
Plaintext
/dts-v1/;
|
|
|
|
/include/ "amazonse.dtsi"
|
|
|
|
/ {
|
|
model = "DGN1000B - Netgear DGN1000B";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
|
|
|
|
leds {
|
|
boot = &power;
|
|
failsafe = &power;
|
|
running = &power;
|
|
|
|
dsl = &dsl;
|
|
internet = &online_green;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
reg = <0x0 0x1000000>;
|
|
};
|
|
|
|
fpi@10000000 {
|
|
gpio: pinmux@E100B10 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
state_default: pinmux {
|
|
asc {
|
|
lantiq,groups = "asc";
|
|
lantiq,function = "asc";
|
|
};
|
|
keys_in {
|
|
lantiq,pins = "io0",/* "io25", */"io29";
|
|
lantiq,pull = <2>;
|
|
lantiq,open-drain = <1>;
|
|
};
|
|
};
|
|
pins_spi_default: pins_spi_default {
|
|
spi_in {
|
|
lantiq,groups = "spi_di";
|
|
lantiq,function = "spi";
|
|
};
|
|
spi_out {
|
|
lantiq,groups = "spi_do", "spi_clk",
|
|
"spi_cs1";
|
|
lantiq,function = "spi";
|
|
lantiq,output = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
etop@E180000 {
|
|
phy-mode = "mii";
|
|
mac-address = [ 00 11 22 33 44 55 ];
|
|
};
|
|
|
|
spi@E100800 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pins_spi_default>;
|
|
|
|
m25p80@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "jedec,spi-nor";
|
|
reg = <1 0>;
|
|
spi-max-frequency = <5000000>;
|
|
|
|
partition@0 {
|
|
reg = <0x0 0x20000>;
|
|
label = "SPI (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@20000 {
|
|
reg = <0x20000 0x10000>;
|
|
label = "ENV_MAC";
|
|
read-only;
|
|
};
|
|
|
|
partition@30000 {
|
|
reg = <0x30000 0x10000>;
|
|
label = "DPF";
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
reg = <0x40000 0x10000>;
|
|
label = "NVRAM";
|
|
read-only;
|
|
};
|
|
|
|
partition@500000 {
|
|
reg = <0x50000 0x003a0000>;
|
|
label = "kernel";
|
|
};
|
|
};
|
|
};
|
|
ifxhcd@E101000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <100>;
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio 0 1>;
|
|
linux,code = <0x198>;
|
|
};
|
|
rfkill {
|
|
label = "rfkill";
|
|
gpios = <&gpio 25 1>;
|
|
linux,code = <0xf7>;
|
|
};
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio 29 1>;
|
|
linux,code = <0x211>;
|
|
};
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
dsl: dsl {
|
|
label = "dgn1000b:green:dsl";
|
|
gpios = <&gpio 1 1>;
|
|
default-state = "on";
|
|
};
|
|
online_green: online {
|
|
label = "dgn1000b:green:online";
|
|
gpios = <&gpio 2 1>;
|
|
default-state = "on";
|
|
};
|
|
online2 {
|
|
label = "dgn1000b:red:online";
|
|
gpios = <&gpio 3 1>;
|
|
default-state = "on";
|
|
};
|
|
wps {
|
|
label = "dgn1000b:green:wps";
|
|
gpios = <&gpio 4 1>;
|
|
default-state = "on";
|
|
};
|
|
power: power {
|
|
label = "dgn1000b:green:power";
|
|
gpios = <&gpio 13 1>;
|
|
default-state = "keep";
|
|
};
|
|
/*
|
|
power red is missing
|
|
*/
|
|
};
|
|
};
|