Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 22e012bad8 hostapd: Add an option to disable beaconing Add a patch for hostapd that introduces a config option "start_disabled" which can be used to bring up an AP interface with beaconing disabled. This is useful in a Repeater-AP setup where the Repeater AP has to start beaconing only after the WDS link has been established. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> SVN-Revision: 37730		2013-08-06 17:59:02 +00:00
docs
include	kernel: update to linux 3.10.4, refresh patches	2013-07-29 22:42:22 +00:00
package	hostapd: Add an option to disable beaconing	2013-08-06 17:59:02 +00:00
scripts	build: process transitive dependencies after local dependencies	2013-08-04 12:17:26 +00:00
target	lantiq: fix TD-W8970 image generation to work with the new tool	2013-08-06 16:25:45 +00:00
toolchain	gcc: merge a bugfix for a MIPS specific internal compiler error	2013-07-31 08:54:56 +00:00
tools	firmware-utils: add a tool TP-Link v2 image generation	2013-08-06 16:25:35 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org