Daniel Dickinson 44e22cbd49 Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network. ... SVN-Revision: 24442		2010-12-10 18:59:58 +00:00
..
007-usb-ohci-support.patch
008-usb-ehci-support.patch
010-add_bcm63xx_ohci_controller.patch
011-add_bcm63xx_ehci_controller.patch
020-watchdog.patch
040-bcm963xx_flashmap.patch
070_bcm63xx_enet_vlan_incoming_fixed.patch
100-reset_buttons.patch
110-gpiodev.patch
120-spi-bitbang-norxtx-support.patch
121-spi-gpio-norxtx-support.patch
141-led_count.patch	patches: Renamed 150-led_count to 141-led_count so it comes before the 15-alice_gate2_leds.patch as which led count was mistakenly given the same number.	2010-12-07 17:32:29 +00:00
150-alice_gate2_leds.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
170-board_livebox.patch
180-udc_preliminary_support.patch	patches: Refreshed patches after led_count	2010-12-07 15:15:51 +00:00
200-extended-platform-devices.patch	patches: Refreshed patches after led_count	2010-12-07 15:15:51 +00:00
200-spi-board-info.patch	patches: Refreshed patches after led_count	2010-12-07 15:15:51 +00:00
211-gen-74x164-gpio-chip-driver.patch
220-board-D4PW.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
221-board-NB4.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
240-spi.patch	patches: Refreshed patches after led_count	2010-12-07 15:15:51 +00:00
250-6358-enet1-external-mii-clk.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
260-no_ehci_over_current_check.patch
270-board-96338W2_E7T.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
300-wl_exports.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
310-CPVA642_board.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
400-board_96358gw.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
410-boardid_fixup.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
420-board_spw500v.patch	Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs.	2010-12-07 15:15:41 +00:00
430-board_gw6200_gw6000.patch	boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds.	2010-12-07 15:15:54 +00:00
440-new_96348gw-11_leds.patch	Fixed Comtrend CT536_CT5621 board settings. These boards are based on the 96348GW-11 reference design but have different GPIOs therefore we use the board fixups now availabed (thanks the patches by Jonas Gorski) to create a separate board entry for these boards and leave the reference design with reference GPIOs. Also these boards only have enet1 (no enet0) so we set that in the board definition, and use a defconfig for a single interface network.	2010-12-10 18:59:58 +00:00