Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jonas Gorski 219b7c91d6 mac80211: add missing DRIVER_11N_SUPPORT selects Multiple drivers were missing their DRIVER_11N_SUPPORT despite supporting 11N capable cards. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 35711		2013-02-21 11:45:12 +00:00
docs
include	kernel: update linux 3.8-rcX to 3.8	2013-02-19 09:17:38 +00:00
package	mac80211: add missing DRIVER_11N_SUPPORT selects	2013-02-21 11:45:12 +00:00
scripts	buildroot: allow specifying libc personality for external toolchains	2013-02-20 15:06:10 +00:00
target	mpc85xx: add kmod-leds-gpio to the default packages	2013-02-21 10:26:03 +00:00
toolchain	toolchain: uclibc: fix typo in uclibc common config	2013-02-21 11:45:07 +00:00
tools	firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1	2013-02-13 16:51:24 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	allow using sstrip with musl	2013-01-29 23:05:43 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	fix ARCH_SUFFIX for mips64{,el}r2	2013-02-20 06:49:02 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org