Openwrt/package/firmware/ipq-wifi
Robert Marko faea7becaf
ipq40xx: add MikroTik hAP ac2 support
This adds support for the MikroTik RouterBOARD RBD52G-5HacD2HnD-TC
(hAP ac²), a  indoor dual band, dual-radio 802.11ac
wireless AP with integrated omnidirectional antennae, USB port and  five
10/100/1000 Mbps Ethernet ports.

See https://mikrotik.com/product/hap_ac2 for more info.

Specifications:
 - SoC: Qualcomm Atheros IPQ4018
 - RAM: 128 MB
 - Storage: 16 MB NOR
 - Wireless:
   · Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
   · Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
 - Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 5x 1000/100/10 port,
             passive PoE in
- 1x USB Type A port

Installation:
Boot the initramfs image via TFTP and then flash the sysupgrade
image using "sysupgrade -n"

Signed-off-by: Robert Marko <robimarko@gmail.com>
2021-04-05 04:13:28 +02:00
..
board-8dev_habanero-dvk.qca4019
board-aruba_ap-303.qca4019
board-avm_fritzrepeater-1200.qca4019
board-buffalo_wtr-m2133hp.qca4019
board-buffalo_wtr-m2133hp.qca9984
board-cellc_rtl30vw.qca4019
board-devolo_magic-2-wifi-next.qca4019
board-dlink_dap2610.qca4019
board-edgecore_ecw5410.qca9984
board-edgecore_oap100.qca4019
board-engenius_eap2200.qca4019
board-engenius_eap2200.qca9888
board-engenius_emd1.qca4019
board-engenius_emr3500.qca4019
board-ezviz_cs-w3-wd1200g-eup.qca4019
board-glinet_gl-ap1300.qca4019
board-glinet_gl-s1300.qca4019
board-linksys_ea8300.qca4019
board-linksys_ea8300.qca9888
board-linksys_mr8300-v0.qca4019
board-linksys_mr8300-v0.qca9888
board-luma_wrtq-329acn.qca4019
board-mikrotik_hap-ac2.qca4019
board-mobipromo_cm520-79f.qca4019
board-nec_wg2600hp3.qca9984
board-plasmacloud_pa1200.qca4019
board-plasmacloud_pa2200.qca4019
board-plasmacloud_pa2200.qca9888
board-qxwlan_e2600ac.qca4019
Makefile