EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
1f5e722486
Openwrt/target/linux/bcm63xx/image/bcm63xx_nand.mk
Adrian Schmutzler f52081bcf9 treewide: provide global default for SUPPORTED_DEVICES 
The majority of our targets provide a default value for the variable
SUPPORTED_DEVICES, which is used in images to check against the
compatible on a running device:

  SUPPORTED_DEVICES := $(subst _,$(comma),$(1))

At the moment, this is implemented in the Device/Default block of
the individual targets or even subtargets. However, since we
standardized device names and compatible in the recent past, almost
all targets are following the same scheme now:

  device/image name:  vendor_model
  compatible:         vendor,model

The equal redundant definitions are a symptom of this process.

Consequently, this patch moves the definition to image.mk making it
a global default. For the few targets not using the scheme above,
SUPPORTED_DEVICES will be defined to a different value in
Device/Default anyway, overwriting the default. In other words:
This change is supposed to be cosmetic.

This can be used as a global measure to get the current compatible
with: $(firstword $(SUPPORTED_DEVICES))
(Though this is not precisely an achievement of this commit.)

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-01-23 12:45:21 +01:00

205 lines
6.3 KiB
Makefile
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#
# BCM63XX NAND Profiles
#
DEVICE_VARS += CFE_PART_FLAGS CFE_PART_ID
DEVICE_VARS += CFE_RAM_FILE
DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD
DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE
DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION
DEVICE_VARS += SERCOMM_PID SERCOMM_VERSION
# CFE expects a single JFFS2 partition with cferam and kernel. However,
# it's possible to fool CFE into properly loading both cferam and kernel
# from two different JFFS2 partitions by adding dummy files (see
# cfe-jffs2-cferam and cfe-jffs2-kernel).
# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam
# JFFS2 partition, which is much safer in case anything goes wrong.
define Device/bcm63xx-nand
FILESYSTEMS := squashfs ubifs
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
IMAGES := cfe.bin sysupgrade.bin
IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi | cfe-wfi-tag
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
KERNEL_SIZE := 5120k
CFE_PART_FLAGS :=
CFE_PART_ID :=
CFE_RAM_FILE :=
CFE_RAM_JFFS2_NAME :=
CFE_RAM_JFFS2_PAD :=
CFE_WFI_VERSION :=
CFE_WFI_CHIP_ID = 0x$$(CHIP_ID)
CFE_WFI_FLASH_TYPE :=
CFE_WFI_FLAGS :=
UBINIZE_OPTS := -E 5
DEVICE_PACKAGES += nand-utils
endef
define Device/sercomm-nand
$(Device/bcm63xx-nand)
IMAGES := factory.img sysupgrade.bin
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
SERCOM_PID :=
SERCOMM_VERSION :=
endef
### Comtrend ###
define Device/comtrend_vg-8050
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VG-8050
CHIP_ID := 63268
SOC := bcm63169
CFE_RAM_FILE := comtrend,vg-8050/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_VERSION := 0x5732
CFE_WFI_FLASH_TYPE := 3
endef
TARGET_DEVICES += comtrend_vg-8050
define Device/comtrend_vr-3032u
$(Device/bcm63xx-nand)
DEVICE_VENDOR := Comtrend
DEVICE_MODEL := VR-3032u
CHIP_ID := 63268
SOC := bcm63168
CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_VERSION := 0x5732
CFE_WFI_FLASH_TYPE := 3
endef
TARGET_DEVICES += comtrend_vr-3032u
### Huawei ###
define Device/huawei_hg253s-v2
$(Device/bcm63xx-nand)
IMAGES := flash.bin sysupgrade.bin
IMAGE/flash.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | cfe-jffs2-cferam | append-ubi
DEVICE_VENDOR := Huawei
DEVICE_MODEL := HG253s
DEVICE_VARIANT := v2
CHIP_ID := 6362
CFE_PART_FLAGS := 1
CFE_PART_ID := 0x0001EFEE
CFE_RAM_FILE := huawei,hg253s-v2/cferam.000
CFE_RAM_JFFS2_NAME := cferam.000
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
CFE_WFI_FLASH_TYPE := 3
endef
TARGET_DEVICES += huawei_hg253s-v2
### Netgear ###
define Device/netgear_dgnd3700-v2
$(Device/bcm63xx-nand)
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := DGND3700
DEVICE_VARIANT := v2
CHIP_ID := 6362
CFE_RAM_FILE := netgear,dgnd3700-v2/cferam
CFE_RAM_JFFS2_NAME := cferam
CFE_RAM_JFFS2_PAD := 496k
BLOCKSIZE := 16k
PAGESIZE := 512
DEVICE_PACKAGES += $(B43_PACKAGES) $(USB2_PACKAGES)
CFE_WFI_VERSION := 0x5731
CFE_WFI_FLASH_TYPE := 2
endef
TARGET_DEVICES += netgear_dgnd3700-v2
### Sercomm ###
define Device/sercomm_ad1018
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := AD1018
CHIP_ID := 6328
CFE_RAM_FILE := sercomm,ad1018/cferam
CFE_RAM_JFFS2_NAME := cferam
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(B43_PACKAGES) $(USB2_PACKAGES)
CFE_WFI_FLASH_TYPE := 3
CFE_WFI_VERSION := 0x5731
SERCOMM_PID := \
30 30 30 30 30 30 30 31 34 31 35 31 35 33 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 33 30 31 33 30 30 30 30 30 30 30 30 \
0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_ad1018
define Device/sercomm_h500-s-lowi
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := H500-s
DEVICE_VARIANT := lowi
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
CHIP_ID := 63268
SOC := bcm63167
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
SERCOMM_PID := \
30 30 30 30 30 30 30 31 34 33 34 62 33 31 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 33 33 30 35 30 30 30 30 30 30 30 30 \
0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_h500-s-lowi
define Device/sercomm_h500-s-vfes
$(Device/sercomm-nand)
DEVICE_VENDOR := Sercomm
DEVICE_MODEL := H500-s
DEVICE_VARIANT := vfes
DEVICE_LOADADDR := $(KERNEL_LOADADDR)
KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
CHIP_ID := 63268
SOC := bcm63167
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
VID_HDR_OFFSET := 2048
DEVICE_PACKAGES += $(USB2_PACKAGES)
SERCOMM_PID := \
30 30 30 30 30 30 30 31 34 32 35 38 34 62 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
30 30 30 30 33 34 31 37 30 30 30 30 30 30 30 30 \
0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_h500-s-vfes
Reference in New Issue View Git Blame Copy Permalink