Openwrt/target/linux/brcm63xx/patches-3.14/559-board_vw6339gu.patch
Jonas Gorski b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00

120 lines
1.9 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -1988,6 +1988,108 @@ static struct board_info __initdata boar
},
},
};
+
+static struct board_info __initdata board_vw6339gu = {
+ .name = "VW6339GU",
+ .expected_cpu_id = 0x63268,
+
+ .has_uart0 = 1,
+
+ .has_ehci0 = 1,
+ .has_ohci0 = 1,
+ .num_usbh_ports = 1,
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "LAN2",
+ },
+
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "LAN3",
+ },
+
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "LAN4",
+ },
+
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "LAN1",
+ },
+
+ [4] = {
+ .used = 1,
+ .phy_id = 7,
+ .name = "WAN",
+ },
+ },
+ },
+
+ .leds = {
+ {
+ .name = "VW6339GU:green:power",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "VW6339GU:red:power",
+ .gpio = 0,
+ .active_low = 1,
+ },
+ {
+ .name = "VW6339GU:green:internet",
+ .gpio = 8,
+ .active_low = 1,
+ },
+ {
+ .name = "VW6339GU:red:internet",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ {
+ .name = "VW6339GU:green:dsl",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "VW6339GU:green:wps",
+ .gpio = 7,
+ .active_low = 1,
+ },
+ {
+ .name = "VW6339GU:green:usb",
+ .gpio = 15,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 32,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ {
+ .desc = "wps",
+ .gpio = 34,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_63268 */
/*
@@ -2074,6 +2176,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_63268
&board_963269bhr,
+ &board_vw6339gu,
#endif
};