Openwrt

Openwrt build for Asrock G10 Router

Go to file

Florian Fainelli 1e21e3b514 soloscli utility for Solos ADSL2+ modems Utility for interrogating Traverse Technologies' Solos ADSL2+ modems Signed-off-by: Nathan Williams <nathan@traverse.com.au> SVN-Revision: 23619		2010-10-24 13:46:32 +00:00
docs
include	add support for darcs repositories	2010-10-24 12:36:44 +00:00
package	soloscli utility for Solos ADSL2+ modems	2010-10-24 13:46:32 +00:00
scripts	add support for darcs-based feeds	2010-10-24 12:36:51 +00:00
target	add required symbols to allow building of 2.6.35.7	2010-10-23 18:56:19 +00:00
toolchain
tools
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	Add HOST_FPIC. It currently always is -fPIC, because that should work on all platforms, even if it may generate slightly inefficient code on some arches.	2010-10-23 20:30:43 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org