Openwrt/target/linux/generic/patches-2.6.38/726-phy_rtl8366.patch
Hauke Mehrtens a4c0645326 kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.

SVN-Revision: 26905
2011-05-15 17:23:02 +00:00

45 lines
1.2 KiB
Diff

--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -158,4 +158,29 @@ config MDIO_OCTEON
If in doubt, say Y.
+config RTL8366_SMI
+ tristate "Driver for the RTL8366 SMI interface"
+ depends on GENERIC_GPIO
+ ---help---
+ This module implements the SMI interface protocol which is used
+ by some RTL8366 ethernet switch devices via the generic GPIO API.
+
+if RTL8366_SMI
+
+config RTL8366S_PHY
+ tristate "Driver for the Realtek RTL8366S switch"
+ select SWCONFIG
+
+config RTL8366RB_PHY
+ tristate "Driver for the Realtek RTL8366RB switch"
+ select SWCONFIG
+
+config RTL8366S_PHY_DEBUG_FS
+ bool "RTL8366 switch driver DEBUG_FS support"
+ depends on RTL8366S_PHY || RTL8366RB_PHY
+ depends on DEBUG_FS
+ default n
+
+endif # RTL8366_SMI
+
endif # PHYLIB
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -20,6 +20,9 @@ obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_AR8216_PHY) += ar8216.o
obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o