Openwrt/target/linux/lantiq/dts/BTHOMEHUBV2B.dts
John Crispin 3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00

290 lines
5.7 KiB
Plaintext

/dts-v1/;
/include/ "danube.dtsi"
/ {
model = "BTHOMEHUBV2B - BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_orange;
failsafe = &power_red;
running = &power_blue;
internet = &broadband_blue;
wifi = &wireless_blue;
};
};
memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */
reg = <0x0 0x4000000>;
};
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 0>;
};
};
fpi@10000000 {
#address-cells = <1>;
#size-cells = <1>;
localbus@0 {
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
1 0 0x4000000 0x4000010>; /* addsel1 */
compatible = "lantiq,localbus", "simple-bus";
nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */
compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */
lantiq,cs = <0>;
bank-width = <2>;
reg = <0 0x0 0x80000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>; /* 256KB */
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x10000>; /* 64KB */
};
partition@50000 {
label = "rg_conf_1";
reg = <0x50000 0x10000>;
};
partition@60000 {
label = "rg_conf_2";
reg = <0x60000 0x10000>;
};
partition@70000 {
label = "rg_conf_factory";
reg = <0x70000 0x10000>;
};
};
nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */
compatible = "gen_nand", "lantiq,nand-xway";
lantiq,cs = <1>;
bank-width = <2>;
reg = <1 0x0 0x2000000 >;
#address-cells = <1>;
#size-cells = <1>;
req-mask = <0x1>; /* PCI request lines to mask during NAND access */
ath9k_cal: partition@0 {
label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */
reg = <0x00000 0x4000>;
read-only;
};
partition@4000 {
label = "kernel";
reg = <0x4000 0x200000>;
};
partition@164000 {
label = "ubi";
reg = <0x204000 0x1DFC000>;
};
};
ath9k_eep {
compatible = "ath9k,eeprom";
ath,eep-flash = <&ath9k_cal 0x0000>;
ath,mac-increment = <1>;
ath,pci-slot = <14>;
ath,eep-endian;
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xway";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100B10 0xA0>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_out {
lantiq,groups = "nand cle", "nand ale";
lantiq,function = "ebu";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
nand_cs1 {
lantiq,groups = "nand cs1";
lantiq,function = "ebu";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci_in {
lantiq,groups = "req1";
lantiq,function = "pci";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci_out {
lantiq,groups = "gnt1";
lantiq,function = "pci";
lantiq,output = <1>;
lantiq,open-drain = <0>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,output = <1>;
lantiq,open-drain = <0>;
};
btn_in {
lantiq,pins = "io2", "io15", "io22";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
};
};
etop@E180000 {
compatible = "lantiq,etop-xway";
reg = <0xE180000 0x40000>;
interrupt-parent = <&icu0>;
interrupts = <73 78>;
phy-mode = "rmii";
mac-address = [ 00 11 22 33 44 55 ];
};
ifxhcd@E101000 {
status = "okay";
};
stp0: stp@E100BB0 {
status = "okay";
#gpio-cells = <2>;
compatible = "lantiq,gpio-stp-xway";
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
pci@E105400 {
status = "okay";
lantiq,bus-clock = <33333333>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 2 1>;
linux,code = <0x198>;
};
findhandset {
label = "findhandset";
gpios = <&gpio 15 1>;
linux,code = <0x101>;
};
wps {
label = "wps";
gpios = <&gpio 22 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
upgrading-orange {
label = "bthomehubv2b:orange:upgrading";
gpios = <&stp0 5 0>;
};
phone-orange {
label = "bthomehubv2b:orange:phone";
gpios = <&stp0 6 0>;
};
phone-blue {
label = "bthomehubv2b:blue:phone";
gpios = <&stp0 7 0>;
};
wireless-orange {
label = "bthomehubv2b:orange:wireless";
gpios = <&stp0 8 0>;
};
wireless_blue: wireless-blue {
label = "bthomehubv2b:blue:wireless";
gpios = <&stp0 9 0>;
};
broadband-red {
label = "bthomehubv2b:red:broadband";
gpios = <&stp0 10 0>;
};
broadband-orange {
label = "bthomehubv2b:orange:broadband";
gpios = <&stp0 11 0>;
};
broadband_blue: broadband-blue {
label = "bthomehubv2b:blue:broadband";
gpios = <&stp0 12 0>;
};
power_red: power-red {
label = "bthomehubv2b:red:power";
gpios = <&stp0 13 0>;
};
power_orange: power-orange {
label = "bthomehubv2b:orange:power";
gpios = <&stp0 14 0>;
default-state = "keep";
};
power_blue: power-blue {
label = "bthomehubv2b:blue:power";
gpios = <&stp0 15 0>;
};
};
};