Openwrt build for Asrock G10 Router
Go to file
2011-02-02 01:26:19 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include prepare support for libiconv, libintl stub/full switching 2011-02-02 01:26:19 +00:00
package base-files: Fix alsa raw audio device hotplug rule 2011-02-02 01:23:34 +00:00
scripts scripts/diffconfig.sh: use the new kconfig mode to remove some more unnecessary entries in the generated output 2011-01-29 02:35:28 +00:00
target add a few missing kernel config symbols 2011-02-01 18:39:55 +00:00
toolchain gcc: fix default version selection - fixes missing MPC configure error during toolchain build 2011-02-01 16:57:01 +00:00
tools tools/mpc: add dependency on mpfr 2011-02-01 16:21:46 +00:00
.gitignore .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default 2010-12-04 10:27:13 +00:00
BSDmakefile
Config.in prepare support for libiconv, libintl stub/full switching 2011-02-02 01:26:19 +00:00
feeds.conf.default switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README
rules.mk remove support for disabling large file support, it is broken, breaks compatibility to anything and has no effect on most packages 2011-01-28 17:00:43 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org