Openwrt/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbsprom.h
2009-04-17 14:09:46 +00:00

277 lines
6.2 KiB
C

/*
* SPROM format definitions for the Broadcom 47xx and 43xx chip family.
*
* Copyright(c) 2002 Broadcom Corporation
*/
#ifndef _SBSPROM_H
#define _SBSPROM_H
#include "typedefs.h"
#include "bcmdevs.h"
/* A word is this many bytes */
#define SRW 2
/* offset into PCI config space for write enable bit */
#define CFG_SROM_WRITABLE_OFFSET 0x88
#define SROM_WRITEABLE 0x10
/* enumeration space consists of N contiguous 4Kbyte core register sets */
#define SBCORES_BASE 0x18000000
#define SBCORES_EACH 0x1000
/* offset from BAR0 for srom space */
#define SROM_BASE 4096
/* number of 2-byte words in srom */
#define SROM_SIZE 64
#define SROM_BYTES (SROM_SIZE * SRW)
#define MAX_FN 4
/* Word 0, Hardware control */
#define SROM_HWCTL 0
#define HW_FUNMSK 0x000f
#define HW_FCLK 0x0200
#define HW_CBM 0x0400
#define HW_PIMSK 0xf000
#define HW_PISHIFT 12
#define HW_4301PISHIFT 13
#define HW_PI4402 0x2
#define HW_FUN4401 0x0001
#define HW_FCLK4402 0x0000
/* Word 1, common-power/boot-rom */
#define SROM_COMMPW 1
/* boot rom present bit */
#define BR_PRESSHIFT 8
/* 15:9 for n; boot rom size is 2^(14 + n) bytes */
#define BR_SIZESHIFT 9
/* Word 2, SubsystemId */
#define SROM_SSID 2
/* Word 3, VendorId */
#define SROM_VID 3
/* Function 0 info, function info length */
#define SROM_FN0 4
#define SROM_FNSZ 8
/* Within each function: */
/* Word 0, deviceID */
#define SRFN_DID 0
/* Words 1-2, ClassCode */
#define SRFN_CCL 1
/* Word 2, D0 Power */
#define SRFN_CCHD0 2
/* Word 3, PME and D1D2D3 power */
#define SRFN_PMED123 3
#define PME_IL 0
#define PME_ENET0 1
#define PME_ENET1 2
#define PME_CODEC 3
#define PME_4402_ENET 0
#define PME_4402_CODEC 1
#define PME_4301_WL 2
#define PMEREP_4402_ENET (PMERD3CV | PMERD3CA | PMERD3H | PMERD2 | PMERD1 | PMERD0 | PME)
/* Word 4, Bar1 enable, pme reports */
#define SRFN_B1PMER 4
#define B1E 1
#define B1SZMSK 0xe
#define B1SZSH 1
#define PMERMSK 0x0ff0
#define PME 0x0010
#define PMERD0 0x0020
#define PMERD1 0x0040
#define PMERD2 0x0080
#define PMERD3H 0x0100
#define PMERD3CA 0x0200
#define PMERD3CV 0x0400
#define IGNCLKRR 0x0800
#define B0LMSK 0xf000
/* Words 4-5, Bar0 Sonics value */
#define SRFN_B0H 5
/* Words 6-7, CIS Pointer */
#define SRFN_CISL 6
#define SRFN_CISH 7
/* Words 36-38: iLine MAC address */
#define SROM_I_MACHI 36
#define SROM_I_MACMID 37
#define SROM_I_MACLO 38
/* Words 36-38: wireless0 MAC address on 43xx */
#define SROM_W0_MACHI 36
#define SROM_W0_MACMID 37
#define SROM_W0_MACLO 38
/* Words 39-41: enet0 MAC address */
#define SROM_E0_MACHI 39
#define SROM_E0_MACMID 40
#define SROM_E0_MACLO 41
/* Words 42-44: enet1 MAC address */
#define SROM_E1_MACHI 42
#define SROM_E1_MACMID 43
#define SROM_E1_MACLO 44
/* Words 42-44: wireless1 MAC address on 4309 */
#define SROM_W1_MACHI 42
#define SROM_W1_MACMID 43
#define SROM_W1_MACLO 44
#define SROM_EPHY 45
/* Word 46: BdRev & Antennas0/1 & ccLock for 430x */
#define SROM_REV_AA_LOCK 46
/* Words 47-51 wl0 PA bx */
#define SROM_WL0_PAB0 47
#define SROM_WL0_PAB1 48
#define SROM_WL0_PAB2 49
#define SROM_WL0_PAB3 50
#define SROM_WL0_PAB4 51
/* Word 52: wl0/wl1 MaxPower */
#define SROM_WL_MAXPWR 52
/* Words 53-55 wl1 PA bx */
#define SROM_WL1_PAB0 53
#define SROM_WL1_PAB1 54
#define SROM_WL1_PAB2 55
/* Woprd 56: itt */
#define SROM_ITT 56
/* Words 59-62: OEM Space */
#define SROM_WL_OEM 59
#define SROM_OEM_SIZE 4
/* Contents for the srom */
#define BU4710_SSID 0x0400
#define VSIM4710_SSID 0x0401
#define QT4710_SSID 0x0402
#define BU4610_SSID 0x0403
#define VSIM4610_SSID 0x0404
#define BU4307_SSID 0x0405
#define BCM94301CB_SSID 0x0406
#define BCM94301MP_SSID 0x0407
#define BCM94307MP_SSID 0x0408
#define AP4307_SSID 0x0409
#define BU4309_SSID 0x040a
#define BCM94309CB_SSID 0x040b
#define BCM94309MP_SSID 0x040c
#define AP4309_SSID 0x040d
#define BU4402_SSID 0x4402
#define CLASS_OTHER 0x8000
#define CLASS_ETHER 0x0000
#define CLASS_NET 0x0002
#define CLASS_COMM 0x0007
#define CLASS_MODEM 0x0300
#define CLASS_MIPS 0x3000
#define CLASS_PROC 0x000b
#define CLASS_FLASH 0x0100
#define CLASS_MEM 0x0005
#define CLASS_SERIALBUS 0x000c
#define CLASS_OHCI 0x0310
/* Broadcom IEEE MAC addresses are 00:90:4c:xx:xx:xx */
#define MACHI 0x90
#define MACMID_BU4710I 0x4c17
#define MACMID_BU4710E0 0x4c18
#define MACMID_BU4710E1 0x4c19
#define MACMID_94710R1I 0x4c1a
#define MACMID_94710R1E0 0x4c1b
#define MACMID_94710R1E1 0x4c1c
#define MACMID_94710R4I 0x4c1d
#define MACMID_94710R4E0 0x4c1e
#define MACMID_94710R4E1 0x4c1f
#define MACMID_94710DEVI 0x4c20
#define MACMID_94710DEVE0 0x4c21
#define MACMID_94710DEVE1 0x4c22
#define MACMID_BU4402 0x4c23
#define MACMID_BU4610I 0x4c24
#define MACMID_BU4610E0 0x4c25
#define MACMID_BU4610E1 0x4c26
#define MACMID_BU4307W 0x4c27
#define MACMID_BU4307E 0x4c28
#define MACMID_94301CB 0x4c29
#define MACMID_94301MP 0x4c2a
#define MACMID_94307MPW 0x4c2b
#define MACMID_94307MPE 0x4c2c
#define MACMID_AP4307W 0x4c2d
#define MACMID_AP4307E 0x4c2e
#define MACMID_BU4309W0 0x4c2f
#define MACMID_BU4309W1 0x4c30
#define MACMID_BU4309E 0x4c31
#define MACMID_94309CBW0 0x4c32
#define MACMID_94309CBW1 0x4c33
#define MACMID_94309MPW0 0x4c34
#define MACMID_94309MPW1 0x4c35
#define MACMID_94309MPE 0x4c36
#define MACMID_BU4401 0x4c37
/* Enet phy settings one or two singles or a dual */
/* Bits 4-0 : MII address for enet0 (0x1f for not there */
/* Bits 9-5 : MII address for enet1 (0x1f for not there */
/* Bit 14 : Mdio for enet0 */
/* Bit 15 : Mdio for enet1 */
/* bu4710 with only one phy on enet1 with address 7: */
#define SROM_EPHY_ONE 0x80ff
/* bu4710 with two individual phys, at 6 and 7, */
/* each mdio connected to its own mac: */
#define SROM_EPHY_TWO 0x80e6
/* bu4710 with a dual phy addresses 0 & 1, mdio-connected to enet0 */
#define SROM_EPHY_DUAL 0x0001
/* r1 board with a dual phy at 0, 1 (NOT swapped and mdc0 */
#define SROM_EPHY_R1 0x0010
/* r4 board with a single phy on enet0 at address 5 and a switch */
/* chip on enet1 (speciall case: 0x1e */
#define SROM_EPHY_R4 0x83e5
/* 4402 uses an internal phy at phyaddr 1; want mdcport == coreunit == 0 */
#define SROM_EPHY_INTERNAL 0x0001
/* 4307 uses an external phy at phyaddr 0; want mdcport == coreunit == 0 */
#define SROM_EPHY_ZERO 0x0000
#define SROM_VERS 0x0001
#endif /* _SBSPROM_H */