Openwrt build for Asrock G10 Router
Go to file
Hauke Mehrtens 145656995f bc: add download mirrors
Add three download mirrors for 'bc', as the Makefile currently defines only
one download location.

@GNU can not be used, as the most recent version of 'bc' is not available at
the general GNU mirrors, and can only be found at the "gnu-alpha" mirrors.

Signed-off-by: Hannu Nyman <hannu.nyman at iki.fi>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45908
2015-06-06 13:48:57 +00:00
config build: enable package list signing by default 2015-05-05 21:16:13 +00:00
docs
include include: image.mk: ensure that $(KDIR)/tmp exists in the IB case as well 2015-06-01 18:00:35 +00:00
package base-files: add openwrt snapshot key 2015-06-05 18:21:53 +00:00
scripts scripts: add srecimage.pl, a script to convert binaries to SREC format 2015-05-28 15:53:55 +00:00
target bcm53xx: update NVRAM driver to support getting contents 2015-06-05 21:49:57 +00:00
toolchain musl: update to version 1.1.9 2015-06-04 20:08:39 +00:00
tools bc: add download mirrors 2015-06-06 13:48:57 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean 2015-05-23 15:28:42 +00:00
README
rules.mk

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org