Openwrt

Openwrt build for Asrock G10 Router

Go to file

Steven Barth 132cbe5e29 dnsmasq: add UCI DNSSEC runtime support Ship keys for the root zone and add two uci options to enable DNSSEC checks: Option 'dnssec': Activate DNSSEC validation Option 'dnsseccheckunsigned': Ensure answers without DNSSEC are in unsigned zones. Signed-off-by: Andre Heider <a.heider@gmail.com> SVN-Revision: 41245		2014-06-18 10:04:29 +00:00
config	Disable crashlog for UML	2014-06-12 11:34:44 +00:00
docs
include	procd: some cleanup for SysupgradeNAND	2014-06-17 15:40:02 +00:00
package	dnsmasq: add UCI DNSSEC runtime support	2014-06-18 10:04:29 +00:00
scripts	scripts/metadata.pl: avoid adding depends and select for the same symbol	2014-06-12 14:35:09 +00:00
target	mvebu: be consistent with kernel config file names	2014-06-17 21:04:45 +00:00
toolchain	musl: fix toolchain build failure caused by some header changes	2014-06-12 20:30:37 +00:00
tools	lantiq: DGN3500 (all known variants) factory and sysupgrade image building support	2014-06-17 15:38:54 +00:00
.gitattributes
.gitignore	add git-src to .gitignore	2014-01-12 12:06:39 +00:00
BSDmakefile
Config.in	move menuconfig options into separate files	2013-11-22 14:30:40 +00:00
feeds.conf.default	feeds.conf.default: add management feed	2014-06-12 15:08:08 +00:00
LICENSE
Makefile	build: remove duplicate variable definitions	2014-03-21 15:54:11 +00:00
README
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org