Mathias Kresin d8b475212b lantiq: kernel 4.14: use vbus-supply devicetree property ... It isn't a phy supply, as the phy is still up if the GPIO is low. It rather is the supply for the vbus. A correct setting/definition will be relevant as soon as USB peripheral mode is supported. Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-05-17 07:40:19 +02:00
..
ase	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
base-files	lantiq: complete AVM FRITZ!Box 3370 support	2018-05-17 07:40:19 +02:00
falcon	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
files/firmware/lantiq
files-4.14/arch/mips/boot/dts	lantiq: kernel 4.14: use vbus-supply devicetree property	2018-05-17 07:40:19 +02:00
image	lantiq: complete AVM FRITZ!Box 3370 support	2018-05-17 07:40:19 +02:00
patches-4.14
xrx200	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
xway	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
xway_legacy	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
config-4.14
Makefile	lantiq: switch to kernel 4.14	2018-05-17 07:40:19 +02:00
modules.mk