Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich 127c395a0e automake: use symlinks instead of hardlinks to link aclocal versions SVN-Revision: 24425		2010-12-10 16:03:27 +00:00
docs
include	support the autoreconf fixup without libtool	2010-12-10 15:20:51 +00:00
package	ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well	2010-12-10 15:17:08 +00:00
scripts	deptest: Also accept stamps that are broken links.	2010-12-08 16:08:14 +00:00
target	ar71xx: select u-boot for the NBG460N in the Default/Minimal profiles as well	2010-12-10 15:17:08 +00:00
toolchain	toolchain/uClibc: apply an upstream 0.9.32 patch (Unwind_Resume calls to go via PLT to avoid text relocations for PIC)	2010-12-09 18:31:13 +00:00
tools	automake: use symlinks instead of hardlinks to link aclocal versions	2010-12-10 16:03:27 +00:00
.gitignore	.gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default	2010-12-04 10:27:13 +00:00
BSDmakefile
Config.in	remove 2.6.25 support	2010-11-22 13:43:32 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org