Openwrt/target/linux/ramips/dts/rt3883_belkin_f9k110x.dtsi
Adrian Schmutzler 58c5deb975 ramips: do not enable unused GPIO controllers
Several devices enable GPIO controllers not used in the DTS files.

Drop them.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-12-17 12:10:10 +01:00

106 lines
1.6 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "rt3883.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "ralink,rt3883-soc";
rtl8367b {
compatible = "realtek,rtl8367b";
gpio-sda = <&gpio0 1 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio0 2 GPIO_ACTIVE_HIGH>;
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x7a0000>;
};
partition@7f0000 {
label = "user-cfg";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
port@0 {
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
};
&state_default {
gpio {
groups = "i2c", "jtag", "uartf";
function = "gpio";
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0x0>;
};
&pci {
status = "okay";
};
&pci1 {
status = "okay";
wifi@1,0 {
compatible = "pci1814,3091";
reg = <0x10000 0 0 0 0>;
ralink,5ghz = <0>;
ralink,mtd-eeprom = <&factory 0x8000>;
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};