Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos 12295e7c0d fix level setup code for GPIO IRQs SVN-Revision: 9788		2007-12-17 15:45:16 +00:00
docs	Allow specifying static IPv6 gateways (#2710 )	2007-11-16 07:27:59 +00:00
include	fix the sdk	2007-12-14 00:33:25 +00:00
package	Make ipkg depends on tar and gunzip (#2821 )	2007-12-17 08:06:03 +00:00
scripts	Add the ADAM2 flashing script (#2780 )	2007-12-16 13:26:01 +00:00
target	fix level setup code for GPIO IRQs	2007-12-17 15:45:16 +00:00
toolchain	hopefully fix occasional uClibc/gcc build failures	2007-12-13 01:17:26 +00:00
tools	Prevent the use of underscores in package names (#2801 )	2007-12-13 10:53:57 +00:00
.gitignore	add package/feeds to .gitignore	2007-10-13 02:05:06 +00:00
BSDmakefile
Config.in	add external kernel tree support	2007-11-20 13:21:01 +00:00
feeds.conf
LICENSE
Makefile	fix make clean for unconfigured build trees	2007-12-04 03:04:37 +00:00
README
rules.mk	hopefully fix occasional uClibc/gcc build failures	2007-12-13 01:17:26 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org