Openwrt build for Asrock G10 Router
0ffe21c792
The RB2011UiAS is almost exactly the same as the RB2011UAS, which is already supported. Hardware-wise, it adds a passive power injector on Eth10. Software-wise, Routerboot passes a different board name on the kernel command line. Hence the need for a patch. Not yet working: * touchscreen: doesn't work on RB2011UAS either. The touchscreen itself seems to be driven by an ADS7843-compatible IC, but figuring out which GPIO pins it's connected to is work for the future. * control of power injector: remains off. Probably also GPIO-controlled. Signed-off-by: Soren Harward <stharward@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5841/ [juhosg: rename and refresh the kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 41617 |
||
|---|---|---|
| config | ||
| docs | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org