Openwrt/target/linux/ipq40xx/patches-5.4/0017-v5.8-phy-add-driver-for-Qualcomm-IPQ40xx-USB-PHY.patch
Robert Marko 4f277b4da5 ipq40xx: 5.4: update and reorder patches
A lot of patches are outdated versions of upstreamed patches and
drivers.

So lets pull in the upstreamed patches and reorder remaining ones.

This drops the unnecessary 721-dts-ipq4019-add-ethernet-essedma-node.patch
which adds nodes for not yet in OpenWrt IPQESS driver.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>
[do not touch 902-dts-ipq4019-ap-dk04.1.patch here]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-11-13 16:08:58 +01:00

198 lines
5.5 KiB
Diff

From 3c9d8f6c03a2cda1849ec3c84f82ec030d1f49ef Mon Sep 17 00:00:00 2001
From: Robert Marko <robert.marko@sartura.hr>
Date: Sun, 3 May 2020 22:18:22 +0200
Subject: [PATCH] phy: add driver for Qualcomm IPQ40xx USB PHY
Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs.
The driver sets up HS and SS phys.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
drivers/phy/qualcomm/Kconfig | 7 +
drivers/phy/qualcomm/Makefile | 1 +
drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 ++++++++++++++++++++
3 files changed, 156 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA
depends on OF
select GENERIC_PHY
+config PHY_QCOM_IPQ4019_USB
+ tristate "Qualcomm IPQ4019 USB PHY driver"
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
+
config PHY_QCOM_IPQ806X_SATA
tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
depends on ARCH_QCOM
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
+ *
+ * Based on code from
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+struct ipq4019_usb_phy {
+ struct device *dev;
+ struct phy *phy;
+ void __iomem *base;
+ struct reset_control *por_rst;
+ struct reset_control *srif_rst;
+};
+
+static int ipq4019_ss_phy_power_off(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ reset_control_assert(phy->por_rst);
+ msleep(10);
+
+ return 0;
+}
+
+static int ipq4019_ss_phy_power_on(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ ipq4019_ss_phy_power_off(_phy);
+
+ reset_control_deassert(phy->por_rst);
+
+ return 0;
+}
+
+static struct phy_ops ipq4019_usb_ss_phy_ops = {
+ .power_on = ipq4019_ss_phy_power_on,
+ .power_off = ipq4019_ss_phy_power_off,
+};
+
+static int ipq4019_hs_phy_power_off(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ reset_control_assert(phy->por_rst);
+ msleep(10);
+
+ reset_control_assert(phy->srif_rst);
+ msleep(10);
+
+ return 0;
+}
+
+static int ipq4019_hs_phy_power_on(struct phy *_phy)
+{
+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
+
+ ipq4019_hs_phy_power_off(_phy);
+
+ reset_control_deassert(phy->srif_rst);
+ msleep(10);
+
+ reset_control_deassert(phy->por_rst);
+
+ return 0;
+}
+
+static struct phy_ops ipq4019_usb_hs_phy_ops = {
+ .power_on = ipq4019_hs_phy_power_on,
+ .power_off = ipq4019_hs_phy_power_off,
+};
+
+static const struct of_device_id ipq4019_usb_phy_of_match[] = {
+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops},
+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops},
+ { },
+};
+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
+
+static int ipq4019_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+ struct ipq4019_usb_phy *phy;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ phy->dev = &pdev->dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->base)) {
+ dev_err(dev, "failed to remap register memory\n");
+ return PTR_ERR(phy->base);
+ }
+
+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
+ if (IS_ERR(phy->por_rst)) {
+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
+ dev_err(dev, "POR reset is missing\n");
+ return PTR_ERR(phy->por_rst);
+ }
+
+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst");
+ if (IS_ERR(phy->srif_rst))
+ return PTR_ERR(phy->srif_rst);
+
+ phy->phy = devm_phy_create(dev, NULL, of_device_get_match_data(dev));
+ if (IS_ERR(phy->phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy->phy);
+ }
+ phy_set_drvdata(phy->phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver ipq4019_usb_phy_driver = {
+ .probe = ipq4019_usb_phy_probe,
+ .driver = {
+ .of_match_table = ipq4019_usb_phy_of_match,
+ .name = "ipq4019-usb-phy",
+ }
+};
+module_platform_driver(ipq4019_usb_phy_driver);
+
+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
+MODULE_LICENSE("GPL v2");