b7a9a183fb
Hardware -------- RockChip RK3328 ARM64 (4 cores) 1GB DDR4 RAM 2x 1000 Base-T 3 LEDs (LAN / WAN / SYS) 1 Button (Reset) Micro-SD slot USB 2.0 Port Installation ------------ Uncompress the OpenWrt sysupgrade and write it to a micro SD card using dd. MAC-address ----------- The vendor code supports reading a MAC address from an EEPROM connected via i2c0 of the SoC. The EEPROM (address 0x51) should contain the MAC address in binary at offset 0xfa. However, my two units didn't come with such an EEPROM soldered on. The EEPROM should be placed between the SoC and the GPIO pins on the board. (U10) Generating rendom MAC addresses works around this issue. Otherwise, all boards running the same image have identical MAC addresses. Signed-off-by: David Bauer <mail@david-bauer.net>
61 lines
1.4 KiB
Diff
61 lines
1.4 KiB
Diff
From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
|
|
From: David Bauer <mail@david-bauer.net>
|
|
Date: Fri, 10 Jul 2020 21:12:16 +0200
|
|
Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
|
|
|
|
Enable the USB3 port on the FriendlyARM NanoPi R2S.
|
|
This is required for the USB3 attached LAN port to work.
|
|
|
|
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
---
|
|
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 27 +++++++++++++++++++
|
|
1 file changed, 27 insertions(+)
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
|
@@ -68,6 +68,18 @@
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
+ vcc_rtl8153: vcc-rtl8153-regulator {
|
|
+ compatible = "regulator-fixed";
|
|
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&rtl8153_en_drv>;
|
|
+ regulator-always-on;
|
|
+ regulator-name = "vcc_rtl8153";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ enable-active-high;
|
|
+ };
|
|
+
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
@@ -288,6 +300,12 @@
|
|
rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
+
|
|
+ usb {
|
|
+ rtl8153_en_drv: rtl8153-en-drv {
|
|
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
+ };
|
|
+ };
|
|
};
|
|
|
|
&sdmmc {
|
|
@@ -328,3 +346,12 @@
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
+
|
|
+&usbdrd3 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&usbdrd_dwc3 {
|
|
+ dr_mode = "host";
|
|
+ status = "okay";
|
|
+};
|