fa6d53261a
The DTS files in files-4.19 and files-5.4 are exactly identical except for one file (qcom-ipq4018-emr3500.dts), which is only present for 5.4. Since there is no point in maintaining all these identical files twice, this patch moves them to the "files" directory. If there ever was a new kernel with substantial DTS changes, a new folder would need to be introduced anyway and could easily be done. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
270 lines
4.2 KiB
Plaintext
270 lines
4.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
// Copyright (c) 2018, Robert Marko <robimarko@gmail.com>
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
|
/ {
|
|
soc {
|
|
rng@22000 {
|
|
status = "okay";
|
|
};
|
|
|
|
mdio@90000 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
ess-psgmii@98000 {
|
|
status = "okay";
|
|
};
|
|
|
|
counter@4a1000 {
|
|
compatible = "qcom,qca-gcnt";
|
|
reg = <0x4a1000 0x4>;
|
|
};
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
status = "okay";
|
|
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
};
|
|
|
|
ess_tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
|
|
usb2: usb2@60f8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
usb3: usb3@8af8800 {
|
|
status = "okay";
|
|
};
|
|
|
|
crypto@8e3a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog@b017000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ess-switch@c000000 {
|
|
status = "okay";
|
|
|
|
switch_lan_bmp = <0x10>; /* lan port bitmap */
|
|
};
|
|
|
|
edma@c080000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
mdio_pins: mdio_pinmux {
|
|
pinmux_1 {
|
|
pins = "gpio53";
|
|
function = "mdio";
|
|
};
|
|
|
|
pinmux_2 {
|
|
pins = "gpio52";
|
|
function = "mdc";
|
|
};
|
|
|
|
pinconf {
|
|
pins = "gpio52", "gpio53";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
serial_pins: serial_pinmux {
|
|
mux {
|
|
pins = "gpio60", "gpio61";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi_0_pinmux {
|
|
pin {
|
|
function = "blsp_spi0";
|
|
pins = "gpio55", "gpio56", "gpio57";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
pin_cs {
|
|
function = "gpio";
|
|
pins = "gpio54", "gpio59";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_spi1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
|
|
|
|
flash@0 {
|
|
status = "okay";
|
|
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "SBL1";
|
|
reg = <0x00000000 0x00040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@40000 {
|
|
label = "MIBIB";
|
|
reg = <0x00040000 0x00020000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@60000 {
|
|
label = "QSEE";
|
|
reg = <0x00060000 0x00060000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c0000 {
|
|
label = "CDT";
|
|
reg = <0x000c0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@d0000 {
|
|
label = "DDRPARAMS";
|
|
reg = <0x000d0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "APPSBLENV"; /* uboot env*/
|
|
reg = <0x000e0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@f0000 {
|
|
label = "APPSBL"; /* uboot */
|
|
reg = <0x000f0000 0x00080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@170000 {
|
|
label = "ART";
|
|
reg = <0x00170000 0x00010000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
|
|
spi-nand@1 {
|
|
status = "okay";
|
|
|
|
compatible = "spi-nand";
|
|
reg = <1>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "ubi";
|
|
reg = <0x00000000 0x08000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&serial_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&gmac0 {
|
|
qcom,poll_required = <1>;
|
|
qcom,poll_required_dynamic = <1>;
|
|
qcom,phy_mdio_addr = <3>;
|
|
vlan_tag = <1 0x10>;
|
|
};
|
|
|
|
&gmac1 {
|
|
qcom,poll_required = <1>;
|
|
qcom,poll_required_dynamic = <1>;
|
|
qcom,phy_mdio_addr = <4>;
|
|
vlan_tag = <2 0x20>;
|
|
};
|
|
|
|
&wifi0 {
|
|
status = "okay";
|
|
|
|
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
|
|
qcom,ath10k-calibration-variant = "8devices-Jalapeno";
|
|
};
|
|
|
|
&usb3_ss_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_hs_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2_hs_phy {
|
|
status = "okay";
|
|
};
|