fa6d53261a
The DTS files in files-4.19 and files-5.4 are exactly identical except for one file (qcom-ipq4018-emr3500.dts), which is only present for 5.4. Since there is no point in maintaining all these identical files twice, this patch moves them to the "files" directory. If there ever was a new kernel with substantial DTS changes, a new folder would need to be introduced anyway and could easily be done. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
243 lines
4.1 KiB
Plaintext
243 lines
4.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
|
|
|
#include "qcom-ipq4019.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/soc/qcom,tcsr.h>
|
|
|
|
/ {
|
|
model = "EZVIZ CS-W3-WD1200G EUP";
|
|
compatible = "ezviz,cs-w3-wd1200g-eup";
|
|
|
|
aliases {
|
|
led-boot = &led_status_green;
|
|
led-failsafe = &led_status_red;
|
|
led-running = &led_status_blue;
|
|
led-upgrade = &led_status_green;
|
|
};
|
|
|
|
soc {
|
|
rng@22000 {
|
|
status = "okay";
|
|
};
|
|
|
|
mdio@90000 {
|
|
status = "okay";
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>;
|
|
reset-delay-us = <5000>;
|
|
};
|
|
|
|
ess-psgmii@98000 {
|
|
status = "okay";
|
|
};
|
|
|
|
tcsr@1949000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1949000 0x100>;
|
|
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
|
};
|
|
|
|
tcsr@194b000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x194b000 0x100>;
|
|
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
|
};
|
|
|
|
ess_tcsr@1953000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1953000 0x1000>;
|
|
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
|
};
|
|
|
|
tcsr@1957000 {
|
|
compatible = "qcom,tcsr";
|
|
reg = <0x1957000 0x100>;
|
|
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
|
};
|
|
|
|
crypto@8e3a000 {
|
|
status = "okay";
|
|
};
|
|
|
|
watchdog@b017000 {
|
|
status = "okay";
|
|
};
|
|
|
|
ess-switch@c000000 {
|
|
status = "okay";
|
|
};
|
|
|
|
edma@c080000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_status_red: status_red {
|
|
label = "cs-w3-wd1200g-eup:red:status";
|
|
gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_status_green: status_green {
|
|
label = "cs-w3-wd1200g-eup:green:status";
|
|
gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_status_blue: status_blue {
|
|
label = "cs-w3-wd1200g-eup:blue:status";
|
|
gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
serial_pins: serial_pinmux {
|
|
mux {
|
|
pins = "gpio60", "gpio61";
|
|
function = "blsp_uart0";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
mdio_pins: mdio_pinmux {
|
|
mux_1 {
|
|
pins = "gpio53";
|
|
function = "mdio";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux_2 {
|
|
pins = "gpio52";
|
|
function = "mdc";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
spi_0_pins: spi_0_pinmux {
|
|
pin {
|
|
function = "blsp_spi0";
|
|
pins = "gpio55", "gpio56", "gpio57";
|
|
drive-strength = <12>;
|
|
bias-disable;
|
|
};
|
|
pin_cs {
|
|
function = "gpio";
|
|
pins = "gpio54";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp1_spi1 {
|
|
pinctrl-0 = <&spi_0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <24000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition0@0 {
|
|
label = "SBL1";
|
|
reg = <0x00000000 0x00040000>;
|
|
read-only;
|
|
};
|
|
|
|
partition1@40000 {
|
|
label = "MIBIB";
|
|
reg = <0x00040000 0x00020000>;
|
|
read-only;
|
|
};
|
|
|
|
partition2@60000 {
|
|
label = "QSEE";
|
|
reg = <0x00060000 0x00060000>;
|
|
read-only;
|
|
};
|
|
|
|
partition3@c0000 {
|
|
label = "CDT";
|
|
reg = <0x000c0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition4@d0000 {
|
|
label = "DDRPARAMS";
|
|
reg = <0x000d0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition5@E0000 {
|
|
label = "APPSBLENV";
|
|
reg = <0x000e0000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition6@F0000 {
|
|
label = "APPSBL";
|
|
reg = <0x000f0000 0x00080000>;
|
|
read-only;
|
|
};
|
|
|
|
partition7@170000 {
|
|
label = "ART";
|
|
reg = <0x00170000 0x00010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition9@580000 {
|
|
compatible = "denx,fit";
|
|
label = "firmware";
|
|
reg = <0x00180000 0x00e80000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
pinctrl-0 = <&serial_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
|
|
&cryptobam {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi0 {
|
|
status = "okay";
|
|
qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
|
|
};
|
|
|
|
&wifi1 {
|
|
status = "okay";
|
|
qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup";
|
|
};
|