Openwrt

Openwrt build for Asrock G10 Router

Go to file

Gabor Juhos 0950922925 generic: remove linux version checks from myloader.c The myloader partition parser code uses ifdef wrappers to make the code usable on kernels below version 3.2. All targets are using kernel 3.3 at least so the wraper is not needed. Remove that. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37880		2013-09-02 16:33:13 +00:00
docs
include	netfilter: Add IPv6-NAT support for kernel and ipt Thanks to Berni, Adam Novak and Sedat Dilek for patches and inspiration	2013-09-01 17:59:48 +00:00
package	Add rpcd - an extensible backend server for ubus-over-json-rpc operations, session and acl management.	2013-09-02 15:36:51 +00:00
scripts	scripts/checkpatch.pl: Fix whitespace errors	2013-08-31 11:16:49 +00:00
target	generic: remove linux version checks from myloader.c	2013-09-02 16:33:13 +00:00
toolchain	build: decouple the mips16 support flag from the toolchain	2013-08-14 13:02:29 +00:00
tools	upx: upgrade to 3.09	2013-08-19 01:22:29 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	Config.in: improve wording for kernel/DT inclusion flags	2013-08-28 00:07:40 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	build: decouple the mips16 support flag from the toolchain	2013-08-14 13:02:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org