Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 08ae6296ca build: define STAMP_CONFIGURED recursively Defining STAMP_CONFIGURED statically caused it not to reflect changes to PKG_CONFIG_DEPENDS made after including package.mk, like the additional options added by feeds.mk for all packages. Furthermore, as STAMP_CONFIGURED_WILDCARD was already defined recursively, the patsubst in its definition would never match, and in consequence, the stamps were never removed. This caused packages not to be rebuilt when they should have been. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44927		2015-03-21 21:47:53 +00:00
config	config: add function tracers	2015-03-18 20:08:21 +00:00
docs
include	build: define STAMP_CONFIGURED recursively	2015-03-21 21:47:53 +00:00
package	perf: don't error on warnings	2015-03-21 21:47:48 +00:00
scripts	buildroot: make it easier to build all kmods	2015-03-16 11:51:54 +00:00
target	oxnas: remove pre kernel 3.18 support from pinctrl driver	2015-03-21 21:47:20 +00:00
toolchain	toolchain/kernel-headers: remove an obsolete patch directory	2015-03-17 11:16:45 +00:00
tools	tools: add back and update mm-macros, it is required for libsigc++	2015-03-20 11:34:47 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds.conf.default: add new targets feed	2015-03-19 11:58:35 +00:00
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org