Openwrt/target/linux/mvebu/patches-4.19
Scott Roberts d2a1075973 mvebu: backport mvneta and comphy from linux 5.x
These patches backport support for the ARMADA 3700 COMPHY driver.
Also backported is the mvneta driver.  This will allow switching
the SGMII speed using SMC calls.  To support this you must update
the firmware using Marvells 18.12 version (this has now been
upstreamed).  The mvneta driver allows 2500basex and 2500baset.

Signed-off-by: Scott Roberts <ttocsr@gmail.com>
2019-10-12 23:43:08 +02:00
..
002-add_powertables.patch
003-add_switch_nodes.patch
004-add_sata_disk_activity_trigger.patch
005-linksys_hardcode_nand_ecc_settings.patch
006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
100-find_active_root.patch
102-revert_i2c_delay.patch
205-armada-385-rd-mtd-partitions.patch
206-ARM-mvebu-385-ap-Add-partitions.patch
210-clearfog_switch_node.patch
220-disable-untested-dsa-boards.patch
230-armada-xp-linksys-mamba-broken-idle.patch
300-mvneta-tx-queue-workaround.patch
400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
401-pci-mvebu-time-out-reset-on-link-up.patch
402-net-phylink-only-call-mac_config-during-resolve-when.patch
403-net-phylink-ensure-inband-AN-works-correctly.patch
404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
405-net-phy-marvell10g-add-SFP-support.patch
406-sfp-add-sfp-compatible.patch
407-sfp-display-SFP-module-information.patch
408-sfp-more-cotsworks-fixes.patch
412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
450-reprobe_sfp_phy.patch
513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch
514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch
522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch
524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
526-PCI-aardvark-disable-LOS-state-by-default.patch
527-PCI-aardvark-allow-to-specify-link-capability.patch
528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch
530-add_armada-3820-uDPU-dts.patch
531-net-mvneta-Add-support-for-2500Mbps-SGMII.patch
532-net-mvneta-correct-typo.patch
533-net-mvneta-Dont-advertise-2.5G-modes.patch
534-net-mvneta-remove-redundant-check-for.patch
535-net-marvell-neta-add-comphy-support.patch
536-net-marvell-neta-disable-comphy-when-setting-mode.patch
537-net-mvneta-add-2500baset-support.patch
538-phy-add-QSGMII-and-PCIE-modes.patch
539-phy-core-add-PHY_MODE_ETHERNET.patch
540-phy-fix-build-breakage-add-PHY_MODE_SATA.patch
541-phy-core-rework-phy_set_mode-to-accept-phy-mode-and-.patch
542-phy-add-A3700-COMPHY-support.patch
543-arm64-dts-marvell-armada-37xx-declare-the-COMPHY.patch