Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 07352ca2c7 ralink: fix hw status almost full not work on mt7620 and mt7621 the old FE_INT_STATUS register becomes two registers. FE_INT_STATUS and INT_STATUS. so the hw status almost full must change to read from FE_INT_STATUS register. tx/rx done read from INT_STATUS register. mt7620 datasheet define CNT_GDM1_AF at BIT(29). but after test it should be BIT(13). why? Signed-off-by: michael lee <igvtee@gmail.com> SVN-Revision: 44371		2015-02-09 19:34:49 +00:00
config	config: remove CONFIG_BUILD_STATIC_TOOLS	2015-02-06 00:00:51 +00:00
docs
include	base-files: taint the build if the override mechanism is used	2015-02-09 12:10:07 +00:00
package	kernel: add missing symbol to realtek wifi	2015-02-09 18:15:30 +00:00
scripts	build: propagate override information to .config file	2015-02-09 12:09:43 +00:00
target	ralink: fix hw status almost full not work on mt7620 and mt7621	2015-02-09 19:34:49 +00:00
toolchain	eglibc: mark 2.15 as broken it is effected by CVE-2015-0235	2015-01-28 12:06:05 +00:00
tools	tools: remove static linking support	2015-02-06 00:00:43 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: use relative paths for BASH, TAR, FIND, PATCH, PYTHON	2015-02-06 12:35:36 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org