Openwrt build for Asrock G10 Router
Go to file
Felix Fietkau 06966a534a add nvram fixup script
SVN-Revision: 7742
2007-06-27 05:26:20 +00:00
docs
include add nat module fix from #1772 2007-06-25 09:55:07 +00:00
package add nvram fixup script 2007-06-27 05:26:20 +00:00
scripts remove a useless warning 2007-06-12 13:23:43 +00:00
target Remove ssb patch that was part of previous tree pull 2007-06-26 20:19:19 +00:00
toolchain added several patches to make packages compile for the foxboard 2007-06-12 20:36:02 +00:00
tools add lzma compression format to mkimage (will be used on infineon amazon) 2007-06-24 04:59:27 +00:00
.gitignore make top-level .gitignore only apply to top-level files/directories (#1960) 2007-06-25 10:54:32 +00:00
BSDmakefile
Config.in
LICENSE
Makefile
README
rules.mk don't include .config if DUMP is set 2007-06-26 20:24:55 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org