Openwrt/package/network/config/ltq-vdsl-app/Makefile
Jeroen Peelaerts 4f27ea7c33 lantiq: use ActualNetDataRate for speed reporting
Switch to Actual Net Data Rate (ACTNDR) for speed reporting on lantiq VDSL modems

Refer to ITU-T G.997.1 chapter 7.5.2.8

Independent whether retransmission is used or not in a given transmit direction:
-   In L0 state, this parameter reports the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) at which the bearer channel is operating.
-   In  L2 state, the parameter contains the Net Data Rate (as specified in G.992.3, G.992.5 or G.993.2) in the previous L0 state.

Signed-off-by: Jeroen Peelaerts <jeroen.peelaerts@gmail.com>
Reviewed-by: Andre Heider <a.heider@gmail.com>
2021-04-03 18:56:02 +02:00

86 lines
2.6 KiB
Makefile

# Copyright (C) 2010 OpenWrt.org
# Copyright (C) 2015-2016 Lantiq Beteiligungs GmbH & Co KG.
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=ltq-vdsl-app
PKG_VERSION:=4.17.18.6
PKG_RELEASE:=8
PKG_BASE_NAME:=dsl_cpe_control
PKG_SOURCE:=$(PKG_BASE_NAME)_vrx-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=@OPENWRT
PKG_HASH:=da8bb929526a61aea0e153ef524331fcd472a1ebbc6d88ca017735a4f82ece02
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_BASE_NAME)-$(PKG_VERSION)
PKG_LICENSE:=BSD-2-Clause
PKG_BUILD_DEPENDS:=ltq-vdsl
PKG_FLAGS:=nonshared
PKG_FIXUP:=autoreconf
include $(INCLUDE_DIR)/package.mk
define Package/ltq-vdsl-app
SECTION:=net
CATEGORY:=Network
TITLE:=Lantiq VDSL userland tool
URL:=http://www.lantiq.com/
DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +ltq-dsl-base +libubox +libubus
endef
define Package/ltq-vdsl-app/description
Userland tool needed to control Lantiq VDSL CPE
endef
# ltq-vdsl-app uses a header provided by the MEI driver which has some
# conditionals.
#
# Define them here with the default values they would get in the MEI driver,
# have the same view on both sides.
#
# If you change them, you need to change them for the ltq-vdsl-app as well
VDSL_APP_CFLAGS = \
-DMAX_CLI_PIPES=1 \
-DMEI_SUPPORT_DEBUG_STREAMS=1 \
-DMEI_SUPPORT_OPTIMIZED_FW_DL=1
CONFIGURE_ARGS += \
--enable-vrx \
--enable-vrx-device=vr9 \
--enable-driver-include="-I$(STAGING_DIR)/usr/include/drv_vdsl_cpe_api" \
--enable-device-driver-include="-I$(STAGING_DIR)/usr/include/vdsl/" \
--enable-ifxos \
--enable-ifxos-include="-I$(STAGING_DIR)/usr/include/ifxos" \
--enable-ifxos-library="-I$(STAGING_DIR)/usr/lib" \
--enable-add-appl-cflags="$(VDSL_APP_CFLAGS)" \
--enable-debug \
--disable-dti \
--with-channels-per-line="1"
#CONFIGURE_ARGS += --enable-model=full
#CONFIGURE_ARGS += --enable-model=lite
#CONFIGURE_ARGS += --enable-model=footprint
CONFIGURE_ARGS += \
--enable-model=typical \
--enable-dsl-pm-showtime \
--disable-dsl-ceoc \
--enable-dsl-pm-retx-counters \
--enable-dsl-pm-retx-thresholds
#CONFIGURE_ARGS += --enable-model=debug
define Package/ltq-vdsl-app/install
$(INSTALL_DIR) $(1)/etc/init.d $(1)/sbin $(1)/etc/hotplug.d/dsl
$(INSTALL_BIN) ./files/dsl_control $(1)/etc/init.d/
$(INSTALL_BIN) ./files/10_atm.sh $(1)/etc/hotplug.d/dsl
$(INSTALL_BIN) ./files/10_ptm.sh $(1)/etc/hotplug.d/dsl
$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control
$(INSTALL_BIN) ./files/dsl_cpe_pipe.sh $(1)/sbin/
endef
$(eval $(call BuildPackage,ltq-vdsl-app))