Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 0183df8ed9 Fix ARV7518 USB This patch correctly fixes USB on Lantiq ARV7518. There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/). Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 35354		2013-01-28 17:43:35 +00:00
docs
include	kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips	2013-01-26 16:26:13 +00:00
package	firewall: flush conntrack table after changing interface rules	2013-01-28 15:53:44 +00:00
scripts	scripts: bundle-libraries.sh: support mixing 32bit and 64bit binaries	2013-01-28 15:54:27 +00:00
target	Fix ARV7518 USB	2013-01-28 17:43:35 +00:00
toolchain	gcc: fix build for MIPS64 targets introduced by musl patch	2013-01-07 18:16:40 +00:00
tools	adds support for Edimax BR-6524N	2013-01-06 11:11:30 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	kernel: turn on kallsyms and debug info by default	2013-01-21 16:13:43 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	rules.mk: only select latest libgcc.a with wildcard match (#12798 )	2013-01-13 20:59:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org