Openwrt/target/linux/ar7/patches-2.6.30/930-titan-platform.patch
Florian Fainelli 5a481b16ad add support for titan variant (WRTP54G) (#6185)
SVN-Revision: 19022
2010-01-03 20:19:32 +00:00

249 lines
5.5 KiB
Diff

--- a/arch/mips/ar7/platform.c 2009-11-18 14:57:44.000000000 +0800
+++ b/arch/mips/ar7/platform.c 2009-11-18 15:43:04.000000000 +0800
@@ -128,6 +128,36 @@
},
};
+static struct resource cpmac_low_res_titan[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = TITAN_REGS_MAC0,
+ .end = TITAN_REGS_MAC0 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 27,
+ .end = 27,
+ },
+};
+
+static struct resource cpmac_high_res_titan[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = TITAN_REGS_MAC1,
+ .end = TITAN_REGS_MAC1 + 0x7ff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 41,
+ .end = 41,
+ },
+};
+
static struct resource vlynq_low_res[] = {
{
.name = "regs",
@@ -182,6 +212,60 @@
},
};
+static struct resource vlynq_low_res_titan[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = TITAN_REGS_VLYNQ0,
+ .end = TITAN_REGS_VLYNQ0 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 33,
+ .end = 33,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x0c000000,
+ .end = 0x0fffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 80,
+ .end = 111,
+ },
+};
+
+static struct resource vlynq_high_res_titan[] = {
+ {
+ .name = "regs",
+ .flags = IORESOURCE_MEM,
+ .start = TITAN_REGS_VLYNQ1,
+ .end = TITAN_REGS_VLYNQ1 + 0xff,
+ },
+ {
+ .name = "irq",
+ .flags = IORESOURCE_IRQ,
+ .start = 34,
+ .end = 34,
+ },
+ {
+ .name = "mem",
+ .flags = IORESOURCE_MEM,
+ .start = 0x40000000,
+ .end = 0x43ffffff,
+ },
+ {
+ .name = "devirq",
+ .flags = IORESOURCE_IRQ,
+ .start = 112,
+ .end = 143,
+ },
+};
+
static struct resource usb_res[] = {
{
.name = "regs",
@@ -226,6 +310,18 @@
.phy_mask = 0x7fffffff,
};
+static struct plat_cpmac_data cpmac_low_data_titan = {
+ .reset_bit = 17,
+ .power_bit = 20,
+ .phy_mask = 0x40000000,
+};
+
+static struct plat_cpmac_data cpmac_high_data_titan = {
+ .reset_bit = 21,
+ .power_bit = 22,
+ .phy_mask = 0x80000000,
+};
+
static struct plat_vlynq_data vlynq_low_data = {
.ops.on = vlynq_on,
.ops.off = vlynq_off,
@@ -240,6 +336,20 @@
.gpio_bit = 19,
};
+static struct plat_vlynq_data vlynq_low_data_titan = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 15,
+ .gpio_bit = 14,
+};
+
+static struct plat_vlynq_data vlynq_high_data_titan = {
+ .ops.on = vlynq_on,
+ .ops.off = vlynq_off,
+ .reset_bit = 16,
+ .gpio_bit = 7,
+};
+
static struct platform_device physmap_flash = {
.id = 0,
.name = "physmap-flash",
@@ -273,6 +383,30 @@
.num_resources = ARRAY_SIZE(cpmac_high_res),
};
+static struct platform_device cpmac_low_titan = {
+ .id = 0,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_low_data_titan,
+ },
+ .resource = cpmac_low_res_titan,
+ .num_resources = ARRAY_SIZE(cpmac_low_res_titan),
+};
+
+static struct platform_device cpmac_high_titan = {
+ .id = 1,
+ .name = "cpmac",
+ .dev = {
+ .dma_mask = &cpmac_dma_mask,
+ .coherent_dma_mask = DMA_32BIT_MASK,
+ .platform_data = &cpmac_high_data_titan,
+ },
+ .resource = cpmac_high_res_titan,
+ .num_resources = ARRAY_SIZE(cpmac_high_res_titan),
+};
+
static struct platform_device vlynq_low = {
.id = 0,
.name = "vlynq",
@@ -289,6 +423,22 @@
.num_resources = ARRAY_SIZE(vlynq_high_res),
};
+static struct platform_device vlynq_low_titan = {
+ .id = 0,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_low_data_titan,
+ .resource = vlynq_low_res_titan,
+ .num_resources = ARRAY_SIZE(vlynq_low_res_titan),
+};
+
+static struct platform_device vlynq_high_titan = {
+ .id = 1,
+ .name = "vlynq",
+ .dev.platform_data = &vlynq_high_data_titan,
+ .resource = vlynq_high_res_titan,
+ .num_resources = ARRAY_SIZE(vlynq_high_res_titan),
+};
+
/* This is proper way to define uart ports, but they are then detected
* as xscale and, obviously, don't work...
@@ -333,6 +483,11 @@
{ .name = "status", .gpio = 8, .active_low = 1, },
};
+static struct gpio_led titan_leds[] = {
+ { .name = "status", .gpio = 8, .active_low = 1, },
+ { .name = "wifi", .gpio = 13, .active_low = 1, },
+};
+
static struct gpio_led dsl502t_leds[] = {
{ .name = "status", .gpio = 9, .active_low = 1, },
{ .name = "ethernet", .gpio = 7, .active_low = 1, },
@@ -425,7 +580,7 @@
/* FIXME: the whole thing is unreliable */
prId = prom_getenv("ProductID");
usb_prod = prom_getenv("usb_prod");
-
+
/* If we can't get the product id from PROM, use the default LEDs */
if (!prId)
return;
@@ -442,6 +597,9 @@
} else if (strstr(prId, "DG834")) {
ar7_led_data.num_leds = ARRAY_SIZE(dg834g_leds);
ar7_led_data.leds = dg834g_leds;
+ } else if (strstr(prId, "CYWM")) {
+ ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
+ ar7_led_data.leds = titan_leds;
}
}
@@ -502,14 +660,18 @@
if (res)
return res;
- ar7_device_disable(vlynq_low_data.reset_bit);
- res = platform_device_register(&vlynq_low);
+ ar7_device_disable(ar7_is_titan() ? vlynq_low_data_titan.reset_bit :
+ vlynq_low_data.reset_bit);
+ res = platform_device_register(ar7_is_titan() ? &vlynq_low_titan :
+ &vlynq_low);
if (res)
return res;
if (ar7_has_high_vlynq()) {
- ar7_device_disable(vlynq_high_data.reset_bit);
- res = platform_device_register(&vlynq_high);
+ ar7_device_disable(ar7_is_titan() ? vlynq_high_data_titan.reset_bit :
+ vlynq_high_data.reset_bit);
+ res = platform_device_register(ar7_is_titan() ? &vlynq_high_titan :
+ &vlynq_high);
if (res)
return res;
}