Openwrt/target/linux/bcm53xx/patches-5.10/030-v5.11-0001-ARM-dts-BCM5301X-Linksys-EA9500-add-port-5-and-port-.patch
Rafał Miłecki d8e8a2a8db bcm53xx: add testing support for kernel 5.10
It still requires fixing PCIe support:
[    6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges:
[    6.652217] pcie_iproc_bcma bcma0:7:   No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff]
[    6.661833] OF: /axi@18000000/pcie@12000: Missing device_type
[    6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12
[    6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges:
[    6.681514] pcie_iproc_bcma bcma0:8:   No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff]
[    6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12
[    6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges:
[    6.705048] pcie_iproc_bcma bcma0:9:   No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff]
[    6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-07-29 14:56:14 +02:00

48 lines
1.1 KiB
Diff

From 1ca5f2430c4f9d85b98b8d6e5d93f8d4802faf8e Mon Sep 17 00:00:00 2001
From: Vivek Unune <npcomplete13@gmail.com>
Date: Wed, 14 Oct 2020 15:27:27 -0400
Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7
Add ports 5 and 7 which are connected to gmac cores 1 & 2.
These will be disabled for now.
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
.../boot/dts/bcm47094-linksys-panamera.dts | 24 +++++++++++++++++++
1 file changed, 24 insertions(+)
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -242,6 +242,30 @@
label = "wan";
};
+ port@5 {
+ reg = <5>;
+ ethernet = <&gmac0>;
+ label = "cpu";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@7 {
+ reg = <7>;
+ ethernet = <&gmac1>;
+ label = "cpu";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
port@8 {
reg = <8>;
ethernet = <&gmac2>;