Commit Graph

50508 Commits

Author SHA1 Message Date
Adrian Schmutzler
3a4b751110 ath79: enable UART in SoC DTSI files
The uart node is enabled on all devices except one (GL-USB150 *).
Thus, let's not have a few hundred nodes to enable it, but do not
disable it in the first place.

Where the majority of devices is using it, also move the serial0
alias to the DTSI.

*) Since GL-USB150 even defines serial0 alias, the missing uart
   is probably just a mistake. Anyway, disable it for now so this
   patch stays cosmetic.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-24 02:53:53 +01:00
Sungbo Eo
1322150b0c kirkwood: set testing kernel version to 5.10
Tested on Pogoplug V4.

Linksys EA3500 will not build with buildbot settings and should be
disabled when the target is switched, unless the image size is
reduced again.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[add EA3500 comment]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-24 02:53:53 +01:00
Sungbo Eo
1bb3f593ee kirkwood: update config for kernel 5.10
Update config with make kernel_oldconfig.

CONFIG_SATA_PMP=y is added manually as done for 5.4.
This should be resolved properly in a separate issue.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[add back CONFIG_SATA_PMP, rebase/refresh]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-24 02:53:53 +01:00
Sungbo Eo
58ebc50724 kirkwood: refresh patches for kernel 5.10
Refresh patches to make them apply to kernel 5.10.
The removed patch has been merged upstream.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-02-24 02:53:53 +01:00
Sungbo Eo
e464d365fe kirkwood: copy files to kernel 5.10
Copy config and patches to kernel 5.10.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-02-24 02:53:53 +01:00
Adrian Schmutzler
8d766aa669 kernel: add further missing symbols
CONFIG_NET_DSA_MV88E6XXX_PTP was simply missing in generic config.

CONFIG_I2C_PXA_SLAVE was previously enabled via i2c-pxa package,
but got removed there without moving the symbol to generic config.

Fixes: dd13add3ce ("kernel: i2c-pxa: remove slave")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-24 02:53:53 +01:00
Daniel Golle
5c10f26c28 sysupgrade-nand: allow limiting rootfs_data by setting env variable
Check if firmware environment variable 'rootfs_data_max' exists and is
set to a numerical value greater than 0. If so, limit rootfs_data
volume to that size instead of using the maximum available size.

This is useful on devices with lots of flash where users may want to
have eg. a volume for persistent logs and statistics or for external
applications/containers. Persistence on rootfs overlay is limited by
the size of memory available during the sysugprade process as that
data needs to be copied to RAM while the volume is being recreated
during sysupgrade. Hence it is unsuitable for keeping larger amounts
of data accross upgrade which makes additional volume(s) for
application data desirable.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 01:35:20 +00:00
Daniel Golle
330bd380e8 image: allow building FIT and uImage with ramdisk
Instead of embedding the initrd cpio archive into the kernel, allow
for having an external ramdisk added to the FIT or uImage.
This is useful to overcome kernel size limitations present in many
stock bootloaders, as the ramdisk is then loaded seperately and doesn't
add to the kernel size. Hence we can have larger ramdisks to host ie.
installers with all binaries to flash included (or a web-based
firmware selector).
In terms of performance and total size the differences are neglectible.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 01:35:20 +00:00
Daniel Golle
e6aac8d98f image: add support for building FIT image with filesystem
Allow for single (external-data) FIT image to hold kernel, dtb and
squashfs. In that way, the bootloader verifies the system integrity
including the rootfs, because what's the point of checking that the
hash of the kernel is correct if it won't boot in case of squashfs
being corrupted? Better allow bootloader to check everything needed
to make it at least up to failsafe mode. As a positive side effect
this change also makes the sysupgrade process on nand potentially
much easier as it is now.
In short: mkimage has a parameter '-E' which allows generating FIT
images with 'external' data rather than embedding the data into the
device-tree blob itself. In this way, the FIT structure itself remains
small and can be parsed easily (rather than having to page around
megabytes of image content). This patch makes use of that and adds
support for adding sub-images of type 'filesystem' which are used to
store the squashfs. Now U-Boot can verify the whole OS and the new
partition parsers added in the Linux kernel can detect the filesystem
sub-images, create partitions for them, and select the active rootfs
volume based on the configuration in FIT (passing configuration via
device tree could be implemented easily at a later stage).

This new FIT partition parser works for NOR flash (on top of mtdblock),
NAND flash (on top of ubiblock) as well as classic block devices
(ie. eMMC, SDcard, SATA, NVME, ...).
It could even be used to mount such FIT images via `losetup -P` on a
user PC if this patch gets included in Linux upstream one day ;)

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 01:35:20 +00:00
Rosen Penev
fb83efb626 pcre: disable C++ bindings
Nothing uses them. Allows to simplify the Makefile.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-02-24 00:30:40 +01:00
DENG Qingfang
06af45ec05 ramips: remove obsolete mx25l25635f compatible hack
The kernel bump to 5.4 has removed the mx25l25635f hack, and the
mx25l25635f compatible is no longer required.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
2021-02-24 00:30:40 +01:00
Hauke Mehrtens
030bc39c35 ppp: Update to version 2.4.9
Upstream integrated multiple patches from Distributions and did other
changes:
* rp-pppoe.so was renamed to pppoe.so
* Converted to ANSI C

The following patches were applied upstream:
* 100-debian_ip-ip_option.patch
* 101-debian_close_dev_ppp.patch
* 103-debian_fix_link_pidfile.patch
* 106-debian_stripMSdomain.patch
* 107-debian_pppoatm_wildcard.patch
* 110-debian_defaultroute.patch
* 202-no_strip.patch

Compilation with musl libc was fixed upstream so
140-pppoe_compile_fix.patch is not needed any more

Parts of the 203-opt_flags.patch patch were applied in a different way
upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-02-24 00:30:20 +01:00
Eneas U de Queiroz
12a80e44b9 openssl: always build with GOST engine support
The packages feed has a proposed package for a GOST engine, which needs
support from the main openssl library.  It is a default option in
OpenSSL.  All that needs to be done here is to not disable it.

Package increases by a net 1-byte, so it is not really really worth
keeping this optional.

This commit also includes a commented-out example engine configuration
in openssl.cnf, as it is done for other available engines.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2021-02-23 21:10:56 +01:00
Stijn Segers
06356f0020 ramips: overwrite reset gpio properties in DIR-860L DTS
As suggested by Sergio, this adds GPIOs 19 and 8 explicitly into the
DIR-860L DTS, so the PCI-E ports get reset and the N radio (radio1)
on PCI-E port 1 comes up reliably.

Fixes the following error that popped up in dmesg:

    [    1.638942] mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK)

Suggested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Stijn Segers <foss@volatilesystems.org>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
2021-02-23 21:10:56 +01:00
Stijn Segers
b5bc53813d uboot-envtools: add support for ZyXEL GS-1900-8HP v1 and v2
This adds the necessary nuts and bolts for the uboot settings for both the ZyXEL GS1900-8HP v1 and v2.

Signed-off-by: Stijn Segers <foss@volatilesystems.org>
2021-02-23 21:10:56 +01:00
Sander Vanheule
773949c152 ramips: mt7621: enable SX150x driver
The Netgear R6800 and R6700v2 devices have a Semtech SX1503 GPIO
expander controlling the device LEDs. This expander was initially
supported on 4.14, but support was lost in the transition to 5.4.

Since this driver cannot be built as a kernel module, enable it in the
kernel config for all mt7621 devices.

Run-tested on a Netgear R6800.

Cc: Stijn Segers <foss@volatilesystems.org>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Tested-by: Stijn Segers <foss@volatilesystems.org>
2021-02-23 21:10:56 +01:00
Eneas U de Queiroz
d1dfb577f1 wolfssl: bump to v4.7.0-stable
Biggest fix for this version is CVE-2021-3336, which has already been
applied here.  There are a couple of low severity security bug fixes as
well.

Three patches are no longer needed, and were removed; the one remaining
was refreshed.

This tool shows no ABI changes:
https://abi-laboratory.pro/index.php?view=objects_report&l=wolfssl&v1=4.6.0&v2=4.7.0

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
2021-02-23 21:10:56 +01:00
DENG Qingfang
920eaab1d8 kernel: DSA roaming fix for Marvell mv88e6xxx
Marvell mv88e6xxx switch series cannot perform MAC learning from
CPU-injected (FROM_CPU) DSA frames, which results in 2 issues.
- excessive flooding, due to the fact that DSA treats those addresses
as unknown
- the risk of stale routes, which can lead to temporary packet loss

Backport those patch series from netdev mailing list, which solve these
issues by adding and clearing static entries to the switch's FDB.

Add a hack patch to set default VID to 1 in port_fdb_{add,del}. Otherwise
the static entries will be added to the switch's private FDB if VLAN
filtering disabled, which will not work.

The switch may generate an "ATU violation" warning when a client moves
from the CPU port to a switch port because the static ATU entry added by
DSA core still points to the CPU port. DSA core will then clear the static
entry so it is not fatal. Disable the warning so it will not confuse users.

Link: https://lore.kernel.org/netdev/20210106095136.224739-1-olteanv@gmail.com/
Link: https://lore.kernel.org/netdev/20210116012515.3152-1-tobias@waldekranz.com/
Ref: https://gitlab.nic.cz/turris/turris-build/-/issues/165
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
2021-02-23 21:10:56 +01:00
Rosen Penev
90b1524f75 autotools.mk: fix gettext fixup
The update to gettext 0.21 broke packages that use autotools and
gettext because the sed line was failing with the new version. Fix with
a better sed expression.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-02-23 21:10:56 +01:00
Adrian Schmutzler
5e9b07ff36 kernel: add symbol CONFIG_POWER_RESET_LINKSTATION
Add symbol to generic config (this was added between 5.4 and 5.10),
and remove it from the targets where it was added by kernel_oldconfig
in the meantime.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 21:08:21 +01:00
David Bauer
55ed4bf6d7 generic: add missing symbols
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-23 20:13:37 +01:00
Ilya Lipnitskiy
17f7b217d3 wireguard: don't build on Linux 5.10
There are efforts underway to bring wireguard in-tree for Linux 5.4 and
to have a common build infrastructure for both 5.4 and 5.10 for
kmod-wireguard[0]. Until then, restrict kmod-wireguard to build only on
Linux 5.4, because the wireguard-compat package will not build on Linux
5.10.

[0]: https://github.com/openwrt/openwrt/pull/3885

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-02-23 20:13:30 +01:00
Ilya Lipnitskiy
30b482551d kernel: 5.10: fix kmod build failures
Modify existing modules to reflect their new location in Linux 5.10. Add
missing dependenices.

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
[enable CRYPTO_USER_API_ENABLE_OBSOLETE; add kmod-crypto-hash dependency
to usb-net-rtl8152]
Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-23 20:13:22 +01:00
Ilya Lipnitskiy
57fdcf66f0 kernel: 5.10: fix rtl8812au-ct build
Pull in upstream:
c8d243936f
1e9689c89f

Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
2021-02-23 20:13:15 +01:00
Daniel Golle
9cd089dbbf arm-trusted-firmware-mediatek: use @OPENWRT mirror for blobs
Now that mirrors have picked it up, switch to using the @OPENWRT
mirror instead of hosting those files on Github.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-23 18:03:27 +00:00
Shiji Yang
d1176ad95a ramips: improve gpio control for Phicomm PSG1218
Description:
1. From key and led config setting, we can find only "uartf" and "i2c" are used
as gpio by check mt7620 datasheet. It's time to remove unused pin group.

2. PSG1218 only have three led, so we can remove ethernet led pinctrl. refer to
Phicomm K2G.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2021-02-23 18:31:35 +01:00
Rui Salvaterra
fde9703a48 mvebu: add 5.10 as a testing kernel
Keep 5.4 as stable until further validation.

Tested on Turris Omnia (Rui Salvaterra) and ESPRESSObin v5 (Tomasz
Maciej Nowak). Cortex-A{53,72} subtargets are only build-tested.

Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[added comment about tests]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 18:31:35 +01:00
Rui Salvaterra
b0cdc5ae46 mvebu: fix the Turris Omnia device tree
Enable and fix hardware buffer management. Also fix the IRQ storm caused by a
misconfiguration of the PCA9538 interrupt pin.

Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-02-23 18:31:35 +01:00
Rui Salvaterra
23ebb2e9c3 mvebu: fix the patch numbering
Make each logical patch group numbering contiguous.

Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[add kernel version to backport]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 18:31:35 +01:00
Rui Salvaterra
b43f5a9359 mvebu: refresh 5.10 kconfigs/patches
Also delete already upstreamed patches/changes.

Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-02-23 18:31:35 +01:00
Adrian Schmutzler
7be8ab4f7b mvebu: remove upstreamed DTS files in 5.10
Some armada-3720-espressobin-* files have been upstreamed, move
these to files-5.4.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 18:31:35 +01:00
Rui Salvaterra
202515b901 mvebu: copy 5.4 patches/kconfigs to 5.10
Just a simple copy, no refresh yet.

Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[do not duplicate files]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 18:31:35 +01:00
Rui Salvaterra
4d9ae8ca07 mvebu: refresh the 5.4 kernel configs
Remove the implicit/inherited symbols. While not strictly necessary, this will
make reviewing the diff between 5.4 and 5.10 easier.

Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-02-23 18:31:35 +01:00
Rui Salvaterra
dc6ac62046 kernel: 5.10: add further generic kconfig symbols
This will make the specific kconfig smaller.

Reviewed-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
[improved commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 18:31:35 +01:00
Álvaro Fernández Rojas
4dd5845f49 bmips: fix SMP CPU mapping
SMP isn't supported on BCM6358 since it has a shared TLB. Some boards boot
with CPU #1 instead of CPU #0, and this is currently not supported do to a
smp-bmips bug.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-23 15:25:13 +01:00
Álvaro Fernández Rojas
c015d18cd7 bmips: switch to accepted upstream patch
This patch has been accepted and is going to be in linux v5.12.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-23 15:22:27 +01:00
Álvaro Fernández Rojas
de3066bef7 bmips: rename upstream patches
These patches were applied in linux v5.11, not v5.12.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-23 15:14:41 +01:00
Daniel Golle
5f1bd95278
procd: update to git HEAD
2be57ed cosmetics: provide compatible system info on Aarch64
 37eed13 system: expose if system was booted from initramfs

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-23 13:16:23 +00:00
Daniel Golle
068c82039f arm-trusted-firmware-mediatek: bring back package
* use binary provided by MediaTek to work-around 'bromimage' issue
 * refactor Makefile
 * add mt7622 1c variants (using binaries provided by MTK)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-23 12:28:49 +00:00
Álvaro Fernández Rojas
fc2a4e5682 bmips: bcm6358: add watchdog
Watchdog node was missing in commit 029093a302.

Fixes: 029093a302 ("bmips: add new target")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-23 12:57:28 +01:00
Álvaro Fernández Rojas
f0d5eb149e bmips: remove unneeded downstream serial patch
Disabling CONFIG_SERIAL_8250 makes the upstream serial driver work OOB.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-23 12:35:52 +01:00
Daniel González Cabanelas
50cb3a750f bcm63xx: pinctrl: fix BCM6348 groups
The current driver has some troubles:
 - Some groupings are wrong.
 - The pinctrl group0 owns pins never used (at least in Openwrt) for any
   pinmux. The driver hijacks all the pins on the group avoiding any other
   use, spite they're free. I.e. for buttons, causing this kernel error:
   [  4.735928] gpio-keys-polled keys: unable to claim gpio 479, err=-22
   [  4.742642] gpio-keys-polled: probe of keys failed with error -22
 - Minor errors about groupings on the documentation
 - Missing "diag" grouping in dtsi
 - Wrong groupings in dtsi

Fix it by setting the correct groups.
And relax the pin capturing, letting the gpios belonging to any group to
be used for other purposes like buttons. This was the behavior with stock
firmwares and old OpenWrt versions which never caused any trouble.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2021-02-23 11:01:20 +01:00
Álvaro Fernández Rojas
09bbf55817 bmips: bcm6358: fix EHCI/OHCI kernel panics
ARCH_HAS_SYNC_DMA_FOR_CPU_ALL is causing kernel panics when EHCI or OHCI are
enabled.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-23 10:52:06 +01:00
Adrian Schmutzler
e4d1163de4 imx6: remove redundant IMAGE_NAME
IMAGE_NAME is set twice for ventana, and the second value
actually matches the default in image.mk. Remove both.

Fixes: ded905ce43 ("imx6: extend cubox support to hummingboard,
add support for building full images")

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 00:26:40 +01:00
Paul Spooren
6ab33103af treewide: remove redundant KERNEL_PREFIX definitions
The variables KERNEL_INITRAMFS_PREFIX and KERNEL_PREFIX are already
defined in include/image.mk and don't have to be redefined in the
target Makefiles.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[also cover imx6]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 00:26:40 +01:00
Adrian Schmutzler
020e51facf bmips: split base-files into subtargets
Like done for several targets already, splitting base-files into
subtarget will provide smaller images due to more specific
distribution of files per subtarget and allow to use default cases
more effectively.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 00:26:40 +01:00
Álvaro Fernández Rojas
117b833d61 bmips: add JFFS2 unaligned access patch
This patch is also needed on bmips if SMP is enabled.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-22 21:37:56 +01:00
Álvaro Fernández Rojas
626add3394 bmips: bcm6368: fix bcm2835-rng
IPSEC needs a reset before using its HW RNG.
Otherwise, the numbers generated won't be random at all.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-02-22 21:37:56 +01:00
Shiji Yang
567a88e4b9 ramips: fix Phicomm PSG1218A switch port labels
The lan port sequence was reversed compared to the labels.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
[improve commit title/message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-22 18:49:57 +01:00
Adrian Schmutzler
d4520d75a1 ramips: move aliases to the top in SoC DTSI files
The aliases node is expected as one of the first entries, and
having it there matches alphabetic sorting as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-22 18:49:57 +01:00