Commit Graph

126 Commits

Author SHA1 Message Date
Rui Salvaterra
3326b5e75c treewide: switch the timer frequency to 100 Hz
Some targets select HZ=100, others HZ=250. There's no reason to select a higher
timer frequency (and 100 Hz are available in every architecture), so change all
targets to 100 Hz.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-04-21 10:31:10 +01:00
Zoltan HERPAI
e4a2db1d16 mxs: add support for 5.10 as testing kernel
The 100-ARM-dts-imx23-introduce-mmc0_sck_cfg.patch does
not need to be copied over as it's already merged upstream.

Other notable change is the USB_CHIPIDEA_OF change to
USB_CHIPIDEA_IMX [1].

[1] https://www.spinics.net/lists/linux-usb/msg193347.html

Compile/runtime-tested on Olinuxino Micro (imx23).

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-11 19:14:05 +02:00
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Adrian Schmutzler
7157c77c6d target: use SPDX license identifiers on scripts
Use SPDX license tags to allow machines to check licenses.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 15:47:23 +01:00
Adrian Schmutzler
598b29585e target: use SPDX license identifiers on Makefiles
Use SPDX license tags to allow machines to check licenses.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-10 15:47:18 +01:00
Sungbo Eo
583e39e3d5 kernel: drop empty kmod-ledtrig-* packages
The following four led triggers are enabled in generic config.

* kmod-ledtrig-default-on
* kmod-ledtrig-heartbeat
* kmod-ledtrig-netdev
* kmod-ledtrig-timer

Drop the packages and remove them from DEVICE_PACKAGES.
There's no other package depending on them in this repo.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
2021-01-15 18:24:31 +01:00
Adrian Schmutzler
d4ac0ad543 treewide: make dependency on kmod-usb-net selective
A bunch of kernel modules depends on kmod-usb-net, but does not
select it. Make AddDepends/usb-net selective, so we can drop
some redundant +kmod-usb-net definitions for DEVICE_PACKAGES.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-10 12:54:30 +02:00
Felix Fietkau
b0f7ea2853 kernel: unify CONFIG_GPIO_SYSFS in kernel configs
Enable it for all platforms

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-06 12:37:04 +02:00
Petr Štetiar
5ecc0cfd6f kernel: bump 5.4 to 5.4.28
Changelog since 5.4.24 mentions CVE-2019-19769, CVE-2020-8648,
CVE-2020-8649 and CVE-2020-8647.

Removed upstreamed:

 generic: 507-v5.6-iio-chemical-sps30-fix-missing-triggered-buffer-depe.patch
 generic: 600-ipv6-addrconf-call-ipv6_mc_up-for-non-Ethernet-inter.patch
 bcm27xx: 950-0435-ASoC-pcm512x-Fix-unbalanced-regulator-enable-call-in.patch
 ipq806x: 701-stmmac-fix-notifier-registration.patch
 lantiq: 002-pinctrl-falcon-fix-syntax-error.patch
 octeontx: 0002-net-thunderx-workaround-BGX-TX-Underflow-issue.patch

Run tested: apu2, qemu-x86-64, apalis, a64-olinuxino, nbg6617
Build tested: sunxi/a53, imx6, x86/64, ipq40xx

Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> [apu2]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Michael Heimpold
c8946a5baf mxs: fix user led for OLinuXino boards
More testing after kernel upgrade to 5.4 uncovered a regression: the user
led is not present anymore due to a pin mux "collision" in device tree.

A patch sent to upstream kernel was accepted now. Integrate this
pending fix as platform specific patch so that user led is available again.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2020-03-17 00:51:48 +01:00
Petr Štetiar
9ba09653ad treewide: remove maintainer variable from targets
There is no such role as target maintainer anymore, one should always
send corresponding changes for the review and anyone from the commiters
is allowed to merge them or eventually use the hand break and NACK them.

Lets make it clear, that it is solely a community doing the maintenance
tasks.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Piotr Dymacz <pepe2k@gmail.com>
2020-03-16 22:21:45 +01:00
Yousong Zhou
1d03283eb2 kernel: 5.4: remove some dup config options already set in generic
This furthers 860652f4b9 ("kernel: 5.4: move some kconfig options to
generic")

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2020-03-10 14:45:36 +08:00
Michael Heimpold
a5b06b7aa5 mxs: switch to kernel 5.4
Compiled for and run-tested on
 - I2SE Duckbill board
 - Olimex OLinuXino Maxi board

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2020-03-08 15:10:55 +01:00
Rosen Penev
c7382cccd8 mxs: gen_sdcard_ext4_ext4.sh: use /bin/sh
Nothing here needs bash.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[adjust prefix of commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-31 01:19:48 +01:00
Rosen Penev
5ce2f3dc15 mxs: gen_sdcard_vfat_ext4.sh: use /bin/sh
Nothing here needs bash.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[change prefix of commit title]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-31 01:18:13 +01:00
Petr Štetiar
3bbcffa0b6 treewide: kernel config: remove runtime options
Remove CC_HAS_ASM_GOTO, CC_IS_GCC and GCC_VERSION kernel config options
which are set at runtime and which should be ignored now.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-11-24 14:19:43 +01:00
Michael Heimpold
9673d5c7ab mxs: start a console on USB gadget serial ports
The I2SE Duckbill devices are pen-drive like and thus the usage
of the USB gadget subsystem is highly indicated.

Spawning a console if a serial gadget is configured saves
us from connecting a physical debug uart.

On Olimex OLinuXino Maxi/Mini boards, this does not hurt.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-11-09 12:56:34 +01:00
Michael Heimpold
9a5fd2fa85 mxs: switch to askconsole
Remove the dedicated tty name and use askconsole to spawn the console
on serial debug uart.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-11-09 12:56:32 +01:00
Michael Heimpold
002e312538 mxs: add support and switch to kernel 4.19
Also remove kernel 4.14 support and the meanwhile obsolete patch.

This was run-tested on I2SE Duckbill device and
Olimex OLinuXino Maxi board.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Tested-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-11-09 12:56:28 +01:00
Adrian Schmutzler
c5b4fa20fa treewide: replace backticks by $(...) in gen_*_img.sh scripts
This replaces deprecated backticks by more versatile $(...) syntax.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[decapitalized patch subject at submitter's request]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-09-29 00:46:13 +02:00
Michael Heimpold
6ac5144b13 mxs: disable unused serial drivers
This disables PL010 and 8250 serial support for this platform
as both drivers are not used: the debug UART is PL011 and the
application UARTs use a dedicated MXS specific driver.

The kernel size reduction is neglectable, but it also removes
the non-working (confusing) /dev/ttyS0 and /dev/ttyS1 devices
in a running system (which generate errors when trying to use):

  root@OpenWrt:~# echo "hello world" > /dev/ttyS0
  ash: write error: I/O error
  root@OpenWrt:~#

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2019-03-11 19:35:43 +01:00
Michael Heimpold
e880a30549 mxs: use generic sysinfo board detection
Since we do nothing special for mxs based boards,
we can simply use the generic existing code.
We just need to convert scripts to use the DT
compatible strings.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-11-28 23:37:29 +01:00
Koen Vandeputte
f983956a8b kernel: bump 4.14 to 4.14.75
Refreshed all patches.

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2018-10-10 14:45:11 +02:00
Sergey Ryazanov
67a3cdcbb0 kernel: enable THIN_ARCHIVES by default
THIN_ARCHIVES option is enabled by default in the kernel configuration
and no one target config disables it. So enable it by default and remove
this symbol from target specific configs to keep them light.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:20 +02:00
Sergey Ryazanov
bdc2b58c4b kernel: enable FUTEX_PI by default
New FUTEX_PI configuration symbol enabled if FUTEX and RT_MUTEX symbols
are enabled. Both of these symbols are enabled by default in the
generic config, so enable FUTEX_PI by default too to keep platform
specific configs minimal.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:55:12 +02:00
Sergey Ryazanov
978543a246 kernel: disable DRM_LIB_RANDOM by default
DRM_LIB_RANDOM config symbol selected only by DRM_DEBUG_MM_SELFTEST
which is disable by default, so disable DRM_LIB_RANDOM by default too.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:57 +02:00
Sergey Ryazanov
ead26e9db6 kernel: disable DMA_{NOOP|VIRT}_OPS by default
These options do not used by any supported arch, so disable them by
default to make arch configs a bit more clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:49 +02:00
Sergey Ryazanov
f928c338ad kernel: disable ARCH_WANTS_THP_SWAP by default
Only one arch (x86_64) enables this option. So disable
ARCH_WANTS_THP_SWAP by default and remove referencies to it from all
configs (except x86_64) to make them clean.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2018-05-22 07:54:42 +02:00
Michael Heimpold
240e1e3fe4 mxs: drop support for 4.9
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-02-20 13:25:00 +01:00
Michael Heimpold
4812a3d1b5 mxs: enable LRADC driver
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-02-20 13:24:52 +01:00
Zoltan HERPAI
0a2494545e mxs: bump to use 4.14 by default
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-20 13:24:46 +01:00
Zoltan HERPAI
1bbd66c4fc mxs: add support for 4.14
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-20 13:24:43 +01:00
Michael Heimpold
f34b118b35 mxs: rename files to files-4.9
The Device Tree file for I2SE Duckbill boards was updated upstream.
Let's use the upstream version for upcoming kernel 4.14 by keeping
our current version for v4.9 still around.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-02-13 10:01:52 +01:00
Mathias Kresin
e0b9ec8e96 treewide: drop target board_name functions
They are not used any longer.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Mathias Kresin
ac3e05c5d7 treewide: populate boardname and model earlier
For targets using the generic board detection and board specific
settings in diag.sh, the board name is still unset at the time the
set_state() provided by diag.sh is called by 10_indicate_preinit.

Change the execution order to ensure the boardname is populated before
required the first time. Do the target specific board detection as
early as possible, directly followed by the generic one to allow a
seamless switch to the generic function for populating /tmp/sysinfo/.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Michael Heimpold
f788fd0fd3 mxs: drop 4.4 support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2017-06-27 23:22:25 +02:00
Michael Heimpold
9eb68f020b mxs: add support for 4.9 and switch over
I did not port the regulator and power patches from Stefan Wahren
because I talked to him and he told me that work on this is currently
stalled. And since AFAIK nothing depends on these patches, leaving them
out seems reasonable.

I build minimum default configurations and run-tested them on both
I2SE Duckbill devices and Olimex Olinuxino Maxi boards successfully [1].

[1] Tested:
- debug uart is working
- boot without any obvious kernel problem
- network is coming up and data transfer is possible
- Olinuxino: USB detects a plugged-in pen drive

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
[refreshed config and patches]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-06-27 23:22:25 +02:00
Felix Fietkau
e690280a16 mxs: enable nvmem support
fixes build error due to missing kernel config options

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-10 11:05:57 +01:00
Michael Heimpold
8af38c7001 mxs: remove stale references to obsolete kernel module packages
Commit 29443e2 (mxs: remove modules.mk, select drivers in the kernel config)
missed to remove these references, so cleanup it now.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2017-01-28 20:29:00 +01:00
Jo-Philipp Wich
e0579aecf8 mxs: put u-boot images into image staging directory
Do not put the u-boot images into the kernel build directory as this directory
might get removed after kernel updates while the u-boot packages InstallDev
recipe is not getting re-executed because it is still considered current,
leading to image build failures later on due to missing images.

To ensure that built bootloader images persist over kernel version updates in
the buildroot, put them into the new STAGING_DIR_IMAGE directory.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-01-27 16:53:31 +01:00
Felix Fietkau
07c9bde0da mxs: fix image build issues
stage u-boot images in KERNEL_BUILD_DIR for building images
always select uboot-mxs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 07:48:43 +01:00
Felix Fietkau
8935689a8e mxs: gzip ext4 images
Significantly reduces disk usage

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 16:59:28 +01:00
Felix Fietkau
29443e2c94 mxs: remove modules.mk, select drivers in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
915d7db9bd mxs: remove obsolete kernel package depending on linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
64be6fe9ca mxs: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Álvaro Fernández Rojas
87b2b89959 tools: remove old mkdosfs symlink from dosfstools
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-12 11:59:09 +02:00
Felix Fietkau
2b4d21a3e6 mxs: unconditionally install kernel images/dtb files into rootfs (needed by boards)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Felix Fietkau
b9c6361d5f mxs: delete old kernel versions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:52:55 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00