Commit Graph

8614 Commits

Author SHA1 Message Date
Hauke Mehrtens
1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code
SVN-Revision: 33000
2012-08-05 12:39:15 +00:00
John Crispin
5f438c3565 W502V/ARV4525 wireless mac bugfix
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
2012-08-04 20:14:52 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
SVN-Revision: 32992
2012-08-04 19:46:25 +00:00
John Crispin
060b161ca6 cleanup patches
SVN-Revision: 32953
2012-08-03 08:53:02 +00:00
Florian Fainelli
162e272b4b nuport-mac: properly protect the phy interrupt handler
SVN-Revision: 32951
2012-08-02 18:13:17 +00:00
John Crispin
f45132d1d4 Codel: avoid a nul rec_inv_sqrt
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 32950
2012-08-02 13:39:50 +00:00
John Crispin
c2d3274ffc fixes i2c clock enable
SVN-Revision: 32949
2012-08-02 13:29:49 +00:00
Gabor Juhos
e320a7e649 ar71xx: simplify misc IRQ handling
SVN-Revision: 32948
2012-08-02 11:25:49 +00:00
Gabor Juhos
3e1e52a524 ar71xx: fix AR934X_EHCI_SIZE
SVN-Revision: 32947
2012-08-02 11:25:46 +00:00
Gabor Juhos
b873051706 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
SVN-Revision: 32946
2012-08-02 09:54:41 +00:00
Gabor Juhos
e29d6bec6f ar71xx: image: allow to use board specific code in the lzma-loader
SVN-Revision: 32945
2012-08-02 09:54:33 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board
SVN-Revision: 32944
2012-08-02 09:54:28 +00:00
Gabor Juhos
e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
2012-08-02 09:54:21 +00:00
Gabor Juhos
614ca3cc9e generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls
SVN-Revision: 32942
2012-08-02 09:54:13 +00:00
Florian Fainelli
9f011e7225 add missing netmask to the network config
SVN-Revision: 32941
2012-08-01 22:09:13 +00:00
Florian Fainelli
5133a44785 assume the link is up and full-duplex by default
SVN-Revision: 32940
2012-08-01 21:56:54 +00:00
Florian Fainelli
56aac45139 add a default and suitable network config file
SVN-Revision: 32939
2012-08-01 21:56:49 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b ar71xx: ew-dorin: added USB support
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
2012-08-01 12:24:52 +00:00
Florian Fainelli
df48d71d72 resync defconfig enable XZ compression
SVN-Revision: 32930
2012-08-01 12:01:27 +00:00
Florian Fainelli
3cd753408d properly generate squashfs, jffs2 and initramfs images and kernels
SVN-Revision: 32927
2012-07-31 23:09:50 +00:00
Florian Fainelli
c0561a42e7 disable crashlog on ARM platforms for the moment
It is currently badly broken on ARM, until fixed, disable it

SVN-Revision: 32926
2012-07-31 23:09:46 +00:00
John Crispin
f5f36911f0 add lantiq svip support
SVN-Revision: 32925
2012-07-31 18:49:54 +00:00
Jonas Gorski
07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards)
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
2012-07-31 14:27:47 +00:00
Jonas Gorski
820c224029 bcm63xx: add basic bcm6362 support
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
2012-07-31 14:27:42 +00:00
Jonas Gorski
dcd339ac9d bcm63xx: enable usb for bcm6328
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
2012-07-31 14:27:34 +00:00
Jonas Gorski
94d257a851 bcm63xx: update enetswitch driver
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a bcm63xx: reorder patches
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
2012-07-31 14:27:25 +00:00
Florian Fainelli
d1ab4df0d6 move i2c module to target modules.mk
SVN-Revision: 32910
2012-07-29 13:20:51 +00:00
Florian Fainelli
a5738c960a resync config
SVN-Revision: 32908
2012-07-29 13:20:39 +00:00
Florian Fainelli
17244dea00 use the same description as other omap platforms (without the dash)
SVN-Revision: 32907
2012-07-29 13:20:35 +00:00
John Crispin
ee0946a5f4 refresh pwm patch
SVN-Revision: 32905
2012-07-29 11:53:06 +00:00
John Crispin
101766fb00 clean up pwm patches and drivers
SVN-Revision: 32901
2012-07-28 20:47:08 +00:00
Hauke Mehrtens
f0fe59648a add config option CONFIG_I2C_MV64XXX to fix kirkwood build
SVN-Revision: 32898
2012-07-28 11:36:52 +00:00
Florian Fainelli
67891c26ec resync config
SVN-Revision: 32895
2012-07-27 15:35:15 +00:00
Florian Fainelli
a4d699ccf0 fix DVA-G3810BN image generation
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3 add D-link DVA-G3810BN-TL-1 support
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2 Add CT6376-1 board support
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
2012-07-27 15:35:05 +00:00
Florian Fainelli
4acdbb1d87 Add brcmsmac profile
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
2012-07-27 15:34:57 +00:00
John Crispin
0ba7b18cfd Add leds back after migration to sysfs
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

SVN-Revision: 32885
2012-07-26 17:06:55 +00:00
Florian Fainelli
46611b2cbf add more missing config symbols
SVN-Revision: 32884
2012-07-26 17:03:08 +00:00
Florian Fainelli
ac30beaaa7 add more USB-related config symbols
SVN-Revision: 32883
2012-07-26 17:03:05 +00:00
Florian Fainelli
a077e785cf make sure target modules depend on the target
SVN-Revision: 32882
2012-07-26 17:03:02 +00:00
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
2012-07-26 15:42:18 +00:00
John Crispin
87a72d68f1 fix typo in modules.mk
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
2012-07-25 19:52:30 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
SVN-Revision: 32869
2012-07-25 19:36:19 +00:00
Florian Fainelli
adc2b21be8 move isp116x driver to target specific modules.mk
SVN-Revision: 32865
2012-07-25 15:50:45 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk
SVN-Revision: 32863
2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk
SVN-Revision: 32862
2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk
SVN-Revision: 32861
2012-07-25 15:50:33 +00:00
Florian Fainelli
3b5a8548f4 move mmc driver to target specific modules.mk
SVN-Revision: 32859
2012-07-25 15:50:26 +00:00
Florian Fainelli
18038c803c move ixp4xx-eth to target specific modules.mk
SVN-Revision: 32858
2012-07-25 15:50:23 +00:00
Florian Fainelli
4000de357e move crypto module to target specific modules.mk
SVN-Revision: 32856
2012-07-25 15:50:16 +00:00
Florian Fainelli
a282e37c09 move i2c driver to target modules.mk
SVN-Revision: 32855
2012-07-25 15:50:13 +00:00
Florian Fainelli
accbc20045 move watchdog driver to target specific modules.mk
SVN-Revision: 32854
2012-07-25 15:50:10 +00:00
Florian Fainelli
23ffbad602 move target specific spi modules
SVN-Revision: 32853
2012-07-25 15:50:04 +00:00
Florian Fainelli
1859500829 move target specific leds modules to ar71xx modules.mk
SVN-Revision: 32852
2012-07-25 15:50:02 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk
SVN-Revision: 32851
2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk
SVN-Revision: 32850
2012-07-25 15:49:54 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk
SVN-Revision: 32848
2012-07-25 15:49:49 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk
SVN-Revision: 32846
2012-07-25 15:49:42 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.
SVN-Revision: 32845
2012-07-25 14:52:00 +00:00
Florian Fainelli
ab2cb9ce61 add yet another framebuffer symbol
SVN-Revision: 32844
2012-07-25 14:01:57 +00:00
Florian Fainelli
89a312bf48 split framebuffer helper modules to their own packages
SVN-Revision: 32843
2012-07-25 14:01:54 +00:00
Florian Fainelli
ba9f6a46b1 remove broken flag
SVN-Revision: 32842
2012-07-25 14:01:51 +00:00
Florian Fainelli
03c06178e3 package buttons driver separately
SVN-Revision: 32841
2012-07-25 14:01:49 +00:00
Florian Fainelli
83b7462ac9 package cobalt lcd as a module
SVN-Revision: 32840
2012-07-25 14:01:46 +00:00
John Crispin
7ee4798be2 add unset CONFIG_FB_XGI to fix fullbuilds
SVN-Revision: 32836
2012-07-25 09:05:23 +00:00
John Crispin
94a550cc87 cleanup config-3.3, remove =m
SVN-Revision: 32835
2012-07-25 09:05:18 +00:00
John Crispin
1cbfa0c0f5 laguna: fix eeprom read buffer size during platform configuration
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>

SVN-Revision: 32833
2012-07-25 08:01:38 +00:00
John Crispin
0e9e7dcd10 adds target used by rapsberry pi
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
2012-07-24 20:39:17 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
2012-07-24 20:38:43 +00:00
John Crispin
b891eec700 MI424WR - add rev D support
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

SVN-Revision: 32820
2012-07-24 20:38:36 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
2012-07-24 20:37:50 +00:00
Florian Fainelli
93dc8c8d1b move omap specific modules to modules.mk
SVN-Revision: 32810
2012-07-24 19:43:54 +00:00
Florian Fainelli
82c7e05d42 move n810 battery module to omap24 modules.mk
SVN-Revision: 32809
2012-07-24 19:43:49 +00:00
Florian Fainelli
25e20b0b57 move target specific modules to target's module.mk
SVN-Revision: 32808
2012-07-24 19:43:45 +00:00
Florian Fainelli
587f85ac20 package ep93xx framebuffer
SVN-Revision: 32807
2012-07-24 19:43:35 +00:00
Florian Fainelli
5915c85d80 remove crypto symbols override
SVN-Revision: 32806
2012-07-24 19:43:31 +00:00
Florian Fainelli
c238862651 add missing framebuffer related symbols
SVN-Revision: 32804
2012-07-24 19:43:23 +00:00
Florian Fainelli
9f55e6f954 remove broken flag, since it works
SVN-Revision: 32803
2012-07-24 19:43:19 +00:00
Florian Fainelli
c531ce0301 fix sound modules loading order and dependencies
SVN-Revision: 32802
2012-07-24 19:43:15 +00:00
Florian Fainelli
598ef2a2e0 package ep93xx touchscreen driver as a module
SVN-Revision: 32799
2012-07-24 19:42:49 +00:00
Florian Fainelli
0db5f35846 set DEVICE_TYPE to developerboard
SVN-Revision: 32798
2012-07-24 19:42:44 +00:00
John Crispin
5178c177dc rebase config-3.3
SVN-Revision: 32797
2012-07-24 17:28:25 +00:00
John Crispin
53a6946bb4 fix tantos patch properly
SVN-Revision: 32796
2012-07-24 17:28:12 +00:00
John Crispin
6fe32d72a2 make tantos switch select ETHERNET_PACKET_MANGLE
SVN-Revision: 32795
2012-07-24 16:50:14 +00:00
John Crispin
48869ef7c0 move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
This broke falcon builds

SVN-Revision: 32794
2012-07-24 15:33:01 +00:00
Felix Fietkau
b59bc92c6e crashlog: fix dependency, add memblock support
SVN-Revision: 32787
2012-07-22 16:39:33 +00:00
Felix Fietkau
b1f318de53 kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x
SVN-Revision: 32783
2012-07-20 12:28:50 +00:00
Florian Fainelli
05340cc602 rename upgrade image to sysupgrade.bin for consistency
SVN-Revision: 32770
2012-07-17 16:47:57 +00:00