x86: remove obsolete patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48190
This commit is contained in:
Felix Fietkau 2016-01-10 17:19:51 +00:00
parent b34a86691f
commit fed29fa36b
7 changed files with 0 additions and 1031 deletions

View File

@ -1,20 +0,0 @@
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1233,6 +1233,17 @@ static int yenta_probe(struct pci_dev *d
/* We must finish initialization here */
+#ifdef CONFIG_X86_RDC321X
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044f044 */
+#define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0844b060
+/* #define YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK 0x0044d044 */
+
+ config_writel(socket, 32*4, YO_TI1510_DATASHEET_GUY_EXPLAIN_THIS_JUNK);
+ config_writel(socket, 35*4, 0x00000022);
+ config_writel(socket, 36*4, 0x60200000);
+ config_writel(socket, 40*4, 0x7e020000);
+#endif
+
if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) {
/* No IRQ or request_irq failed. Poll */
socket->cb_irq = 0; /* But zero is a valid IRQ number. */

View File

@ -1,11 +0,0 @@
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -531,6 +531,8 @@ config X86_RDC321X
depends on X86_EXTENDED_PLATFORM
select M486
select X86_REBOOTFIXUPS
+ select EMBEDDED
+ select ARCH_REQUIRE_GPIOLIB
---help---
This option is needed for RDC R-321x system-on-chip, also known
as R-8610-(G).

View File

@ -1,176 +0,0 @@
--- /dev/null
+++ b/Documentation/x86/rdc.txt
@@ -0,0 +1,69 @@
+
+Introduction
+============
+
+RDC (http://www.rdc.com.tw) have been manufacturing x86-compatible SoC
+(system-on-chips) for a number of years. They are not the fastest of
+CPUs (clock speeds ranging from 133-150MHz) but 486SX compatibility
+coupled with very low power consumption[1] and low cost make them ideal
+for embedded applications.
+
+
+Where to find
+=============
+
+RDC chips show up in numerous embedded devices, but be careful since
+many of them will not run Linux 2.6 without significant expertise.
+
+There are several variants of what the linux kernel refers to generically
+as RDC321X: R8610, R321x, S3282 and AMRISC20000.
+
+R321x: Found in various routers, see the OpenWrt project for details,
+ http://wiki.openwrt.org/oldwiki/rdcport
+
+R8610: Found on the RDC evaluation board
+ http://www.ivankuten.com/system-on-chip-soc/rdc-r8610/
+
+AMRISC20000: Found in the MGB-100 wireless hard disk
+ http://tintuc.no-ip.com/linux/tipps/mgb100/
+
+S3282: Found in various NAS devices, including the Bifferboard
+ http://www.bifferos.com
+
+
+Kernel Configuration
+====================
+
+Add support for this CPU with CONFIG_X86_RDC321X. Ensure that maths
+emulation is included (CONFIG_MATH_EMULATION selected) and avoid MCE
+(CONFIG_X86_MCE not selected).
+
+
+CPU detection
+=============
+
+None of these chips support the cpuid instruction, so as with some
+other x86 compatible SoCs, we must check the north bridge and look
+for specific 'signature' PCI device config.
+
+The current detection code has been tested only on the Bifferboard
+(S3282 CPU), please send bug reports or success stories with
+other devices to bifferos@yahoo.co.uk.
+
+
+Credits
+=======
+
+Many thanks to RDC for providing the customer codes to allow
+detection of all known variants, without which this detection code
+would have been very hard to ascertain.
+
+
+References
+==========
+
+[1] S3282 in certain NAS solutions consumes less than 1W
+
+
+mark@bifferos.com 2009
+
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -529,6 +529,7 @@ config X86_RDC321X
bool "RDC R-321x SoC"
depends on X86_32
depends on X86_EXTENDED_PLATFORM
+ select PCI
select M486
select X86_REBOOTFIXUPS
select EMBEDDED
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -136,7 +136,8 @@ struct cpuinfo_x86 {
#define X86_VENDOR_CENTAUR 5
#define X86_VENDOR_TRANSMETA 7
#define X86_VENDOR_NSC 8
-#define X86_VENDOR_NUM 9
+#define X86_VENDOR_RDC 9
+#define X86_VENDOR_NUM 10
#define X86_VENDOR_UNKNOWN 0xff
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix
obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o
obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
+obj-$(CONFIG_X86_RDC321X) += rdc.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
--- /dev/null
+++ b/arch/x86/kernel/cpu/rdc.c
@@ -0,0 +1,69 @@
+/*
+ * See Documentation/x86/rdc.txt
+ *
+ * mark@bifferos.com
+ */
+
+#include <linux/pci.h>
+#include <asm/pci-direct.h>
+#include "cpu.h"
+
+
+static void __cpuinit rdc_identify(struct cpuinfo_x86 *c)
+{
+ u16 vendor, device;
+ u32 customer_id;
+
+ if (!early_pci_allowed())
+ return;
+
+ /* RDC CPU is SoC (system-on-chip), Northbridge is always present */
+ vendor = read_pci_config_16(0, 0, 0, PCI_VENDOR_ID);
+ device = read_pci_config_16(0, 0, 0, PCI_DEVICE_ID);
+
+ if (vendor != PCI_VENDOR_ID_RDC || device != PCI_DEVICE_ID_RDC_R6020)
+ return; /* not RDC */
+ /*
+ * NB: We could go on and check other devices, e.g. r6040 NIC, but
+ * that's probably overkill
+ */
+
+ customer_id = read_pci_config(0, 0, 0, 0x90);
+
+ switch (customer_id) {
+ /* id names are from RDC */
+ case 0x00321000:
+ strcpy(c->x86_model_id, "R3210/R3211");
+ break;
+ case 0x00321001:
+ strcpy(c->x86_model_id, "AMITRISC20000/20010");
+ break;
+ case 0x00321002:
+ strcpy(c->x86_model_id, "R3210X/Edimax");
+ break;
+ case 0x00321003:
+ strcpy(c->x86_model_id, "R3210/Kcodes");
+ break;
+ case 0x00321004: /* tested */
+ strcpy(c->x86_model_id, "S3282/CodeTek");
+ break;
+ case 0x00321007:
+ strcpy(c->x86_model_id, "R8610");
+ break;
+ default:
+ pr_info("RDC CPU: Unrecognised Customer ID (0x%x) please report to linux-kernel@vger.kernel.org\n", customer_id);
+ break;
+ }
+
+ strcpy(c->x86_vendor_id, "RDC");
+ c->x86_vendor = X86_VENDOR_RDC;
+}
+
+static const struct cpu_dev __cpuinitconst rdc_cpu_dev = {
+ .c_vendor = "RDC",
+ .c_ident = { "RDC" },
+ .c_identify = rdc_identify,
+ .c_x86_vendor = X86_VENDOR_RDC,
+};
+
+cpu_dev_register(rdc_cpu_dev);

View File

@ -1,23 +0,0 @@
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -63,7 +63,7 @@ static void erase_callback(struct erase_
wake_up(wait_q);
}
-static int erase_write (struct mtd_info *mtd, unsigned long pos,
+int erase_write (struct mtd_info *mtd, unsigned long pos,
int len, const char *buf)
{
struct erase_info erase;
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -416,6 +416,9 @@ extern void register_mtd_user (struct mt
extern int unregister_mtd_user (struct mtd_notifier *old);
void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size);
+int erase_write (struct mtd_info *mtd, unsigned long pos,
+ int len, const char *buf);
+
void mtd_erase_callback(struct erase_info *instr);
static inline int mtd_is_bitflip(int err) {

View File

@ -1,745 +0,0 @@
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -196,6 +196,9 @@ libs-y += arch/x86/lib/
# See arch/x86/Kbuild for content of core part of the kernel
core-y += arch/x86/
+# RDC R-321X support
+core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/
+
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
drivers-$(CONFIG_PCI) += arch/x86/pci/
--- /dev/null
+++ b/arch/x86/mach-rdc321x/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC321x specific parts of the kernel
+#
+obj-$(CONFIG_X86_RDC321X) := platform.o reboot.o boards/sitecom.o boards/ar525w.o boards/bifferboard.o boards/r8610.o
+
--- /dev/null
+++ b/arch/x86/mach-rdc321x/platform.c
@@ -0,0 +1,115 @@
+/*
+ * Generic RDC321x platform devices
+ *
+ * Copyright (C) 2007-2009 OpenWrt.org
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/root_dev.h>
+
+#include <asm/rdc_boards.h>
+
+static struct rdc_platform_data rdcplat_data;
+
+/* LEDS */
+static struct platform_device rdc321x_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &rdcplat_data.led_data,
+ }
+};
+
+/* Button */
+static struct platform_device rdc321x_buttons = {
+ .name = "gpio-keys-polled",
+ .id = -1,
+ .dev = {
+ .platform_data = &rdcplat_data.button_data,
+ }
+};
+
+static __initdata struct platform_device *rdc321x_devs[] = {
+ &rdc321x_leds,
+ &rdc321x_buttons,
+};
+
+const char *__initdata boards[] = {
+ "Sitecom",
+ "AR525W",
+ "Bifferboard",
+ "R8610",
+ 0
+};
+
+static struct map_info rdc_map_info = {
+ .name = "rdc_flash",
+ .size = 0x800000, /* 8MB */
+ .phys = 0xFF800000, /* (u32) -rdc_map_info.size */
+ .bankwidth = 2,
+};
+
+static int __init rdc_board_setup(void)
+{
+ struct mtd_info *mtdinfo;
+ struct mtd_part_parser_data *ppdata;
+ int res;
+
+ simple_map_init(&rdc_map_info);
+
+ while (1) {
+ rdc_map_info.virt = ioremap(rdc_map_info.phys,
+ rdc_map_info.size);
+ if (rdc_map_info.virt == NULL)
+ continue;
+
+ mtdinfo = do_map_probe("cfi_probe", &rdc_map_info);
+ if (mtdinfo == NULL)
+ mtdinfo = do_map_probe("jedec_probe", &rdc_map_info);
+ if (mtdinfo != NULL)
+ break;
+
+ iounmap(rdc_map_info.virt);
+ if ((rdc_map_info.size >>= 1) < 0x100000) /* 1MB */
+ panic("RDC321x: Could not find start of flash!");
+ rdc_map_info.phys = (u32) -rdc_map_info.size;
+ }
+
+ /*
+ * TODO: add a new field to mtd_part_parser_data, and use that
+ * instead of this ugly casting
+ */
+ ppdata = (struct mtd_part_parser_data *) &rdcplat_data;
+ res = mtd_device_parse_register(mtdinfo, boards, ppdata, NULL, 0);
+ if (res) {
+ panic("RDC321x: can't identify board type");
+ return -ENOSYS;
+ }
+
+ ROOT_DEV = 0;
+
+ return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs));
+}
+late_initcall(rdc_board_setup);
--- /dev/null
+++ b/arch/x86/mach-rdc321x/boards/ar525w.c
@@ -0,0 +1,251 @@
+/*
+ * ar525w RDC321x platform devices
+ *
+ * Copyright (C) 2007-2009 OpenWrt.org
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/vmalloc.h>
+#include <linux/mtd/mtd.h>
+#include <linux/slab.h>
+
+#include <asm/rdc_boards.h>
+
+struct image_header {
+ char magic[4]; /* ASICII: GMTK */
+ u32 checksum; /* CRC32 */
+ u32 version; /* x.x.x.x */
+ u32 kernelsz; /* The size of the kernel image */
+ u32 imagesz; /* The length of this image file ( kernel + romfs + this header) */
+ u32 pid; /* Product ID */
+ u32 fastcksum; /* Partial CRC32 on (First(256), medium(256), last(512)) */
+ u32 reserved;
+};
+
+static struct gpio_led ar525w_leds[] = {
+ { .name = "rdc321x:dmz", .gpio = 1, .active_low = 1},
+};
+static struct gpio_keys_button ar525w_btns[] = {
+ {
+ .gpio = 6,
+ .code = BTN_0,
+ .desc = "Reset",
+ .active_low = 1,
+ }
+};
+
+static u32 __initdata crctab[257] = {
+ 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
+ 0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
+ 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+ 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
+ 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+ 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+ 0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
+ 0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
+ 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+ 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+ 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
+ 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+ 0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
+ 0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
+ 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+ 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
+ 0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
+ 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+ 0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
+ 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+ 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+ 0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
+ 0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
+ 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+ 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+ 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
+ 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+ 0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
+ 0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
+ 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+ 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
+ 0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
+ 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+ 0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
+ 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+ 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+ 0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
+ 0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
+ 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+ 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+ 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
+ 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+ 0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
+ 0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
+ 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+ 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
+ 0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
+ 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+ 0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
+ 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+ 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+ 0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
+ 0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
+ 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+ 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+ 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
+ 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+ 0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
+ 0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
+ 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+ 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
+ 0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
+ 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+ 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
+ 0
+};
+
+static u32 __init crc32(u8 * buf, u32 len)
+{
+ register int i;
+ u32 sum;
+ register u32 s0;
+ s0 = ~0;
+ for (i = 0; i < len; i++) {
+ s0 = (s0 >> 8) ^ crctab[(u8) (s0 & 0xFF) ^ buf[i]];
+ }
+ sum = ~s0;
+ return sum;
+}
+
+static int __init fixup_ar525w_header(struct mtd_info *master, struct image_header *header)
+{
+ char *buffer;
+ int res;
+ u32 bufferlength = header->kernelsz + sizeof(struct image_header);
+ u32 len;
+ static char crcbuf[0x400];
+
+ printk(KERN_INFO "Fixing up AR525W header, old image size: %u, new image size: %u\n",
+ header->imagesz, bufferlength);
+
+ buffer = vmalloc(bufferlength);
+ if (!buffer) {
+ printk(KERN_ERR "Can't allocate %u bytes\n", bufferlength);
+ return -ENOMEM;
+ }
+
+ res = mtd_read(master, 0x0, bufferlength, &len, buffer);
+ if (res || len != bufferlength)
+ goto out;
+
+ header = (struct image_header *) buffer;
+ header->imagesz = bufferlength;
+ header->checksum = 0;
+ header->fastcksum = 0;
+
+ memcpy(crcbuf, buffer, 0x100);
+ memcpy(crcbuf + 0x100, buffer + (bufferlength >> 1) - ((bufferlength & 0x6) >> 1), 0x100);
+ memcpy(crcbuf + 0x200, buffer + bufferlength - 0x200, 0x200);
+
+ header->fastcksum = crc32(crcbuf, sizeof(crcbuf));
+ header->checksum = crc32(buffer, bufferlength);
+
+ res = mtd_unlock(master, 0, master->erasesize);
+ if (res != 0 && res != -EOPNOTSUPP) {
+ printk(KERN_ERR "Can't unlock image header\n");
+ goto out;
+ }
+
+ res = erase_write (master, 0, master->erasesize, buffer);
+ if (res)
+ printk(KERN_ERR "Can't rewrite image header\n");
+
+out:
+ vfree(buffer);
+ return res;
+}
+
+static int __init
+parse_ar525w_partitions(struct mtd_info *master, struct mtd_partition **pparts,
+ struct mtd_part_parser_data *plat_data)
+{
+ struct image_header header;
+ int res;
+ size_t len;
+ struct mtd_partition *rdc_flash_parts;
+ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
+
+ if (master->size != 0x400000) //4MB
+ return -ENOSYS;
+
+ res = mtd_read(master, 0x0, sizeof(header), &len, (char *)&header);
+ if (res)
+ return res;
+
+ if (strncmp(header.magic, "GMTK", 4))
+ return -ENOSYS;
+
+ if (header.kernelsz > 0x400000 || header.kernelsz < master->erasesize) {
+ printk(KERN_ERR "AR525W image header found, but seems corrupt, kernel size %u\n", header.kernelsz);
+ return -EINVAL;
+ }
+
+ if (header.kernelsz + sizeof(header) != header.imagesz) {
+ res = fixup_ar525w_header(master, &header);
+ if (res)
+ return res;
+ }
+
+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
+
+ rdc_flash_parts[0].name = "firmware";
+ rdc_flash_parts[0].offset = 0x0;
+ rdc_flash_parts[0].size = 0x3E0000;
+ rdc_flash_parts[1].name = "rootfs";
+ rdc_flash_parts[1].offset = header.kernelsz + sizeof(header);
+ rdc_flash_parts[1].size = rdc_flash_parts[0].size - rdc_flash_parts[1].offset;
+ rdc_flash_parts[2].name = "bootloader";
+ rdc_flash_parts[2].offset = 0x3E0000;
+ rdc_flash_parts[2].size = 0x20000;
+
+ *pparts = rdc_flash_parts;
+
+ pdata->led_data.num_leds = ARRAY_SIZE(ar525w_leds);
+ pdata->led_data.leds = ar525w_leds;
+ pdata->button_data.nbuttons = ARRAY_SIZE(ar525w_btns);
+ pdata->button_data.buttons = ar525w_btns;
+
+ return 3;
+}
+
+static struct mtd_part_parser __initdata ar525w_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_ar525w_partitions,
+ .name = "AR525W",
+};
+
+static int __init ar525w_setup(void)
+{
+ return register_mtd_parser(&ar525w_parser);
+}
+
+arch_initcall(ar525w_setup);
--- /dev/null
+++ b/arch/x86/mach-rdc321x/boards/bifferboard.c
@@ -0,0 +1,74 @@
+/*
+ * Bifferboard RDC321x platform devices
+ *
+ * Copyright (C) 2010 bifferos@yahoo.co.uk
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include <asm/rdc_boards.h>
+
+static int __init
+parse_bifferboard_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ struct mtd_part_parser_data *plat_data)
+{
+ int res;
+ size_t len;
+ struct mtd_partition *rdc_flash_parts;
+ u32 kernel_len;
+ u16 tmp;
+
+ res = mtd_read(master, 0x4000 + 1036, 2, &len, (char *) &tmp);
+ if (res)
+ return res;
+ kernel_len = tmp * master->erasesize;
+
+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 3, GFP_KERNEL);
+
+ *pparts = rdc_flash_parts;
+
+ rdc_flash_parts[0].name = "kernel";
+ rdc_flash_parts[0].offset = 0;
+ rdc_flash_parts[0].size = kernel_len;
+ rdc_flash_parts[1].name = "rootfs";
+ rdc_flash_parts[1].offset = kernel_len;
+ rdc_flash_parts[1].size = master->size - kernel_len - 0x10000;
+ rdc_flash_parts[2].name = "biffboot";
+ rdc_flash_parts[2].offset = master->size - 0x10000;
+ rdc_flash_parts[2].size = 0x10000;
+
+ return 3;
+}
+
+struct mtd_part_parser __initdata bifferboard_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_bifferboard_partitions,
+ .name = "Bifferboard",
+};
+
+static int __init bifferboard_setup(void)
+{
+ return register_mtd_parser(&bifferboard_parser);
+}
+arch_initcall(bifferboard_setup);
--- /dev/null
+++ b/arch/x86/mach-rdc321x/boards/r8610.c
@@ -0,0 +1,69 @@
+/*
+ * R8610 RDC321x platform devices
+ *
+ * Copyright (C) 2009, Florian Fainelli <florian@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include <asm/rdc_boards.h>
+
+static int __init
+parse_r8610_partitions(struct mtd_info *master, struct mtd_partition **pparts,
+ struct mtd_part_parser_data *plat_data)
+{
+ struct mtd_partition *rdc_flash_parts;
+
+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 4, GFP_KERNEL);
+
+ *pparts = rdc_flash_parts;
+
+ rdc_flash_parts[0].name = "kernel";
+ rdc_flash_parts[0].size = 0x001f0000;
+ rdc_flash_parts[0].offset = 0;
+ rdc_flash_parts[1].name = "config";
+ rdc_flash_parts[1].size = 0x10000;
+ rdc_flash_parts[1].offset = MTDPART_OFS_APPEND;
+ rdc_flash_parts[2].name = "rootfs";
+ rdc_flash_parts[2].size = 0x1E0000;
+ rdc_flash_parts[2].offset = MTDPART_OFS_APPEND;
+ rdc_flash_parts[3].name = "redboot";
+ rdc_flash_parts[3].size = 0x20000;
+ rdc_flash_parts[3].offset = MTDPART_OFS_APPEND;
+ rdc_flash_parts[3].mask_flags = MTD_WRITEABLE;
+
+ return 4;
+}
+
+struct mtd_part_parser __initdata r8610_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_r8610_partitions,
+ .name = "R8610",
+};
+
+static int __init r8610_setup(void)
+{
+ return register_mtd_parser(&r8610_parser);
+}
+
+arch_initcall(r8610_setup);
--- /dev/null
+++ b/arch/x86/mach-rdc321x/boards/sitecom.c
@@ -0,0 +1,115 @@
+/*
+ * Sitecom RDC321x platform devices
+ *
+ * Copyright (C) 2007-2009 OpenWrt.org
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+
+#include <asm/rdc_boards.h>
+
+struct image_header {
+ char magic[4];
+ u32 kernel_length;
+ u32 ramdisk_length;
+ char magic2[4];
+ u32 kernel_length2;
+};
+
+static struct gpio_led sitecom_leds[] = {
+ { .name = "rdc321x:power", .gpio = 15, .active_low = 1},
+ { .name = "rdc321x:usb0", .gpio = 0, .active_low = 1},
+ { .name = "rdc321x:usb1", .gpio = 1, .active_low = 1},
+};
+
+static struct gpio_keys_button sitecom_btns[] = {
+ {
+ .gpio = 6,
+ .code = BTN_0,
+ .desc = "Reset",
+ .active_low = 1,
+ }
+};
+
+static int __init
+parse_sitecom_partitions(struct mtd_info *master, struct mtd_partition **pparts,
+ struct mtd_part_parser_data *plat_data)
+{
+ struct image_header header;
+ int res;
+ size_t len;
+ struct mtd_partition *rdc_flash_parts;
+ struct rdc_platform_data *pdata = (struct rdc_platform_data *) plat_data;
+
+ if (master->size != 0x400000) /* 4MB */
+ return -ENOSYS;
+
+ res = mtd_read(master, 0x8000, sizeof(header), &len, (char *)&header);
+ if (res)
+ return res;
+
+ if (strncmp(header.magic, "CSYS", 4) || strncmp(header.magic2, "WRRM", 4))
+ return -ENOSYS;
+
+ rdc_flash_parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL);
+
+ rdc_flash_parts[0].name = "firmware";
+ rdc_flash_parts[0].offset = 0x8000;
+ rdc_flash_parts[0].size = 0x3F0000 - 0x8000;
+ rdc_flash_parts[1].name = "config";
+ rdc_flash_parts[1].offset = 0;
+ rdc_flash_parts[1].size = 0x8000;
+ rdc_flash_parts[2].name = "kernel";
+ rdc_flash_parts[2].offset = 0x8014;
+ rdc_flash_parts[2].size = header.kernel_length;
+ rdc_flash_parts[3].name = "rootfs";
+ rdc_flash_parts[3].offset = 0x8014 + header.kernel_length;
+ rdc_flash_parts[3].size = 0x3F0000 - rdc_flash_parts[3].offset;
+ rdc_flash_parts[4].name = "bootloader";
+ rdc_flash_parts[4].offset = 0x3F0000;
+ rdc_flash_parts[4].size = 0x10000;
+
+ *pparts = rdc_flash_parts;
+
+ pdata->led_data.num_leds = ARRAY_SIZE(sitecom_leds);
+ pdata->led_data.leds = sitecom_leds;
+ pdata->button_data.nbuttons = ARRAY_SIZE(sitecom_btns);
+ pdata->button_data.buttons = sitecom_btns;
+
+ return 5;
+}
+
+struct mtd_part_parser __initdata sitecom_parser = {
+ .owner = THIS_MODULE,
+ .parse_fn = parse_sitecom_partitions,
+ .name = "Sitecom",
+};
+
+static int __init sitecom_setup(void)
+{
+ return register_mtd_parser(&sitecom_parser);
+}
+
+arch_initcall(sitecom_setup);
--- /dev/null
+++ b/arch/x86/mach-rdc321x/reboot.c
@@ -0,0 +1,44 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+
+static void rdc321x_reset(void)
+{
+ unsigned i;
+
+ /* write to southbridge config register 0x41
+ enable pci reset on cpu reset, make internal port 0x92 writeable
+ and switch port 0x92 to internal */
+ outl(0x80003840, 0xCF8);
+ i = inl(0xCFC);
+ i |= 0x1600;
+ outl(i, 0xCFC);
+
+ /* soft reset */
+ outb(1, 0x92);
+}
+
+static int __init rdc_setup_reset(void)
+{
+ machine_ops.emergency_restart = rdc321x_reset;
+ return 0;
+}
+
+arch_initcall(rdc_setup_reset);
--- /dev/null
+++ b/arch/x86/include/asm/rdc_boards.h
@@ -0,0 +1,36 @@
+/*
+ * RDC321x boards
+ *
+ * Copyright (C) 2007-2009 OpenWrt.org
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ * Copyright (C) 2008-2009 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ *
+ */
+
+#ifndef _RDC_BOARDS_H__
+#define _RDC_BOARDS_H__
+
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+
+struct rdc_platform_data {
+ struct gpio_led_platform_data led_data;
+ struct gpio_keys_platform_data button_data;
+};
+
+#endif

View File

@ -1,13 +0,0 @@
--- a/include/linux/timex.h
+++ b/include/linux/timex.h
@@ -158,6 +158,10 @@ int read_current_timer(unsigned long *ti
void ntp_notify_cmos_timer(void);
/* The clock frequency of the i8253/i8254 PIT */
+#ifdef CONFIG_X86_RDC321X
+#define PIT_TICK_RATE 1041816ul
+#else
#define PIT_TICK_RATE 1193182ul
+#endif
#endif /* LINUX_TIMEX_H */

View File

@ -1,43 +0,0 @@
From 357954613bdbab0c1f3986589ff30cc4855a2efd Mon Sep 17 00:00:00 2001
From: root <root@cent.localnet>
Date: Sun, 6 Dec 2009 18:26:43 +0000
Subject: [PATCH 03/14] kexec fix
---
arch/x86/kernel/relocate_kernel_32.S | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -54,8 +54,10 @@ relocate_kernel:
movl %eax, CR0(%edi)
movl %cr3, %eax
movl %eax, CR3(%edi)
+#ifndef CONFIG_X86_RDC321X
movl %cr4, %eax
movl %eax, CR4(%edi)
+#endif
/* read the arguments and say goodbye to the stack */
movl 20+4(%esp), %ebx /* page_list */
@@ -124,7 +126,9 @@ identity_mapped:
* Setting everything to zero seems safe.
*/
xorl %eax, %eax
+#ifndef CONFIG_X86_RDC321X
movl %eax, %cr4
+#endif
jmp 1f
1:
@@ -195,8 +199,10 @@ identity_mapped:
ret
virtual_mapped:
+#ifndef CONFIG_X86_RDC321X
movl CR4(%edi), %eax
movl %eax, %cr4
+#endif
movl CR3(%edi), %eax
movl %eax, %cr3
movl CR0(%edi), %eax