EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

ramips: add support for Asus RT-AC85P

Browse Source 
SoC:	MediaTek MT7621AT dual-core @ 880MHz
RAM:	256M (Winbond W632GG6KB-1)
FLASH:	128MB (Macronix MX30LF1G18AC-TI)
WiFi:	- 2.4GHz MediaTek MT7615N bgn
	- 5GHz MediaTek MT7615N nac
Switch: SoC integrated Gigabit Switch (4 x LAN, 1 x WAN)
USB:	1 x USB 3.1 (Gen 1)
BTN:	Reset, WPS
LED:	- Power (blue)
	- 5Ghz (blue)
	- 2.4GHz (blue)
	- Internet (blue)
	- 4x LAN (blue)
	(LAN/WAN leds are not controllable by GPIOs)
UART: 	UART is present as Pads marked J4 on the PCB.
	3.3V - TX - RX - GND / 57600-8N1
	3.3V is the square pad
MAC:	The MAC address on the router-label matches the MAC of
	the 2.4 GHz WiFi.
	LAN and WAN MAC are identical: MAC_LABEL+4
	5 GHz WiFi MAC: also MAC_LABEL+4

Installation
------------
Via U-Boot tftpd:
Switch on device, within 2s press reset button and keep pressed
until power LED starts blinking slowly.
Upload factory image via tftp put, the router's ip is 192.168.1.1
and expects the client on 192.168.1.75.

The images also work on the Asus RT-AC65P models as tested by Gabor.

Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Tested-by: Gabor Varga <vargagab@gmail.com>
[fixed Asus -> ASUS in DTS]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Birger Koblitz 2019-09-15 16:20:11 +02:00 committed by Petr Štetiar
parent f285e8634c
commit fde8e2e035
5 changed files with 202 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

26
target/linux/ramips/base-files/etc/board.d/02_network
View File

@ -230,6 +230,18 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan" "1:wan" "6@eth0"
;;
asus,rt-ac85p|\
dlink,dir-860l-b1|\
elecom,wrc-1167ghbk2-s|\
elecom,wrc-1900gst|\
elecom,wrc-2533gst|\
huawei,hg255d|\
iodata,wn-ax1167gr|\
iodata,wn-gx300gr|\
iptime,a604m)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
asus,rt-n15|\
belkin,f9k1109v1|\
sitecom,wl-351)
@ -297,17 +309,6 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0"
;;
dlink,dir-860l-b1|\
elecom,wrc-1167ghbk2-s|\
elecom,wrc-1900gst|\
elecom,wrc-2533gst|\
huawei,hg255d|\
iodata,wn-ax1167gr|\
iodata,wn-gx300gr|\
iptime,a604m)
ucidef_add_switch "switch0" \
"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
;;
dlink,dwr-118-a1)
ucidef_add_switch "switch0" \
"1:lan:2" "2:lan:3" "3:lan:1" "4:lan:0" "5:wan" "6@eth0"
@ -553,6 +554,9 @@ ramips_setup_macs()
zbtlink,zbt-we3526)
wan_mac=$(mtd_get_mac_binary factory 0xe006)
;;
asus,rt-ac85p)
wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr)
;;
asus,rt-n56u)
lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)")
wan_mac=$(mtd_get_mac_binary factory 0x8004)

7
target/linux/ramips/base-files/lib/upgrade/platform.sh
View File

@ -18,9 +18,16 @@ platform_do_upgrade() {
mikrotik,rbm33g)
[ -z "$(rootfs_type)" ] && mtd erase firmware
;;
asus,rt-ac85p)
echo "Backing up firmware"
dd if=/dev/mtd4 bs=1024 count=4096 > /tmp/backup_firmware.bin
dd if=/dev/mtd5 bs=1024 count=52224 >> /tmp/backup_firmware.bin
mtd -e firmware2 write /tmp/backup_firmware.bin firmware2
;;
esac
case "$board" in
asus,rt-ac85p|\
hiwifi,hc5962|\
netgear,r6220|\
netgear,r6260|\

162
target/linux/ramips/dts/mt7621_asus_rt-ac85p.dts Normal file
View File

@ -0,0 +1,162 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "asus,rt-ac85p", "mediatek,mt7621-soc";
model = "ASUS RT-AC85P";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
chosen {
bootargs = "console=ttyS0,57600";
};
palmbus: palmbus@1E000000 {
i2c@900 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "rt-ac85p:blue:power";
gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan2g {
label = "rt-ac85p:blue:wlan2g";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0radio";
};
wlan5g {
label = "rt-ac85p:blue:wlan5g";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1radio";
};
};
};
&sdhci {
status = "okay";
};
&nand {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xe0000>;
read-only;
};
partition@e0000 {
label = "u-boot-env";
reg = <0xe0000 0x100000>;
read-only;
};
factory: partition@1e0000 {
label = "factory";
reg = <0x1e0000 0x100000>;
read-only;
};
factory2: partition@2e0000 {
label = "factory2";
reg = <0x2e0000 0x100000>;
read-only;
};
partition@3e0000 {
label = "kernel";
reg = <0x3e0000 0x400000>;
};
partition@7e0000 {
label = "ubi";
reg = <0x7e0000 0x2e00000>;
};
partition@35e0000 {
label = "firmware2";
reg = <0x35e0000 0x3200000>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi0: wifi@0,0 {
compatible = "pci14c3,7615";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pcie1 {
wifi1: wifi@0,0 {
compatible = "pci14c3,7615";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
mediatek,portmap = "wllll";
port@5 {
status = "disabled";
};
};
&i2c {
status = "disabled";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "uart2", "uart3", "i2c";
ralink,function = "gpio";
};
};
};

16
target/linux/ramips/image/mt7621.mk
View File

@ -134,6 +134,22 @@ define Device/asus_rt-ac57u
endef
TARGET_DEVICES += asus_rt-ac57u
define Device/asus_rt-ac85p
MTK_SOC := mt7621
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC85P
IMAGE_SIZE := 51200k
UBINIZE_OPTS := -E 5
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
IMAGES += factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-kernel | pad-to $$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e wpad-basic uboot-envtools
endef
TARGET_DEVICES += asus_rt-ac85p
define Device/buffalo_wsr-1166dhp
MTK_SOC := mt7621
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata

3
target/linux/ramips/patches-4.14/0039-mtd-add-mt7621-nand-support.patch
View File

@ -4256,7 +4256,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#endif /* __NAND_DEF_H__ */
--- /dev/null
+++ b/drivers/mtd/nand/nand_device_list.h
@@ -0,0 +1,59 @@
@@ -0,0 +1,60 @@
+/* Copyright Statement:
+ *
+ * This software/firmware and related documentation ("MediaTek Software") are
@ -4308,6 +4308,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ {0xC8DC, 0x909554, 5, 8, 512, 128, 2048, 64, 0x30C77fff, "F59L4G81A", 0},
+ {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
+ {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
+ {0xC2F1, 0x809502, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G18AC", 0},
+ {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
+ {0x01DA, 0x909546, 5, 8, 256, 128, 2048, 128, 0x30C77fff, "S34ML02G200TF", 0},
+ {0x01DC, 0x909556, 5, 8, 512, 128, 2048, 128, 0x30C77fff, "S34ML04G200TF", 0},