parallel port support, found via google. tested by fenrir
SVN-Revision: 412
This commit is contained in:
Waldemar Brodkorb
parent
f4a21697cd
commit
f53986ed6a
@ -68,6 +68,7 @@ $(eval $(call KMOD_template,USB,usb,\
|
||||
,CONFIG_USB))
|
||||
$(eval $(call KMOD_template,LP,lp,\
|
||||
$(MODULES_DIR)/kernel/drivers/parport/parport.o \
|
||||
$(MODULES_DIR)/kernel/drivers/parport/parport_splink.o \
|
||||
$(MODULES_DIR)/kernel/drivers/char/lp.o \
|
||||
,CONFIG_PARPORT))
|
||||
$(eval $(call KMOD_template,VFAT,vfat,\
|
||||
|
||||
Binary file not shown.
Binary file not shown.
@ -0,0 +1,345 @@
|
||||
/* Low-level parallel port routines for the ASUS WL-500g built-in port
|
||||
*
|
||||
* Author: Nuno Grilo <nuno.grilo@netcabo.pt>
|
||||
* Based on parport_pc source
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/ioport.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/parport.h>
|
||||
#include <linux/parport_pc.h>
|
||||
|
||||
#define SPLINK_ADDRESS 0xBF800010
|
||||
|
||||
#undef DEBUG
|
||||
|
||||
#ifdef DEBUG
|
||||
#define DPRINTK printk
|
||||
#else
|
||||
#define DPRINTK(stuff...)
|
||||
#endif
|
||||
|
||||
|
||||
/* __parport_splink_frob_control differs from parport_splink_frob_control in that
|
||||
* it doesn't do any extra masking. */
|
||||
static __inline__ unsigned char __parport_splink_frob_control (struct parport *p,
|
||||
unsigned char mask,
|
||||
unsigned char val)
|
||||
{
|
||||
struct parport_pc_private *priv = p->physport->private_data;
|
||||
unsigned char *io = (unsigned char *) p->base;
|
||||
unsigned char ctr = priv->ctr;
|
||||
#ifdef DEBUG_PARPORT
|
||||
printk (KERN_DEBUG
|
||||
"__parport_splink_frob_control(%02x,%02x): %02x -> %02x\n",
|
||||
mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
|
||||
#endif
|
||||
ctr = (ctr & ~mask) ^ val;
|
||||
ctr &= priv->ctr_writable; /* only write writable bits. */
|
||||
*(io+2) = ctr;
|
||||
priv->ctr = ctr; /* Update soft copy */
|
||||
return ctr;
|
||||
}
|
||||
|
||||
|
||||
|
||||
static void parport_splink_data_forward (struct parport *p)
|
||||
{
|
||||
DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
|
||||
__parport_splink_frob_control (p, 0x20, 0);
|
||||
}
|
||||
|
||||
static void parport_splink_data_reverse (struct parport *p)
|
||||
{
|
||||
DPRINTK(KERN_DEBUG "parport_splink: parport_data_forward called\n");
|
||||
__parport_splink_frob_control (p, 0x20, 0x20);
|
||||
}
|
||||
|
||||
/*
|
||||
static void parport_splink_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
||||
{
|
||||
DPRINTK(KERN_DEBUG "parport_splink: IRQ handler called\n");
|
||||
parport_generic_irq(irq, (struct parport *) dev_id, regs);
|
||||
}
|
||||
*/
|
||||
|
||||
static void parport_splink_enable_irq(struct parport *p)
|
||||
{
|
||||
DPRINTK(KERN_DEBUG "parport_splink: parport_splink_enable_irq called\n");
|
||||
__parport_splink_frob_control (p, 0x10, 0x10);
|
||||
}
|
||||
|
||||
static void parport_splink_disable_irq(struct parport *p)
|
||||
{
|
||||
DPRINTK(KERN_DEBUG "parport_splink: parport_splink_disable_irq called\n");
|
||||
__parport_splink_frob_control (p, 0x10, 0);
|
||||
}
|
||||
|
||||
static void parport_splink_init_state(struct pardevice *dev, struct parport_state *s)
|
||||
{
|
||||
DPRINTK(KERN_DEBUG "parport_splink: parport_splink_init_state called\n");
|
||||
s->u.pc.ctr = 0xc | (dev->irq_func ? 0x10 : 0x0);
|
||||
if (dev->irq_func &&
|
||||
dev->port->irq != PARPORT_IRQ_NONE)
|
||||
/* Set ackIntEn */
|
||||
s->u.pc.ctr |= 0x10;
|
||||
}
|
||||
|
||||
static void parport_splink_save_state(struct parport *p, struct parport_state *s)
|
||||
{
|
||||
const struct parport_pc_private *priv = p->physport->private_data;
|
||||
DPRINTK(KERN_DEBUG "parport_splink: parport_splink_save_state called\n");
|
||||
s->u.pc.ctr = priv->ctr;
|
||||
}
|
||||
|
||||
static void parport_splink_restore_state(struct parport *p, struct parport_state *s)
|
||||
{
|
||||
struct parport_pc_private *priv = p->physport->private_data;
|
||||
unsigned char *io = (unsigned char *) p->base;
|
||||
unsigned char ctr = s->u.pc.ctr;
|
||||
|
||||
DPRINTK(KERN_DEBUG "parport_splink: parport_splink_restore_state called\n");
|
||||
*(io+2) = ctr;
|
||||
priv->ctr = ctr;
|
||||
}
|
||||
|
||||
static void parport_splink_setup_interrupt(void) {
|
||||
return;
|
||||
}
|
||||
|
||||
static void parport_splink_write_data(struct parport *p, unsigned char d) {
|
||||
DPRINTK(KERN_DEBUG "parport_splink: write data called\n");
|
||||
unsigned char *io = (unsigned char *) p->base;
|
||||
*io = d;
|
||||
}
|
||||
|
||||
static unsigned char parport_splink_read_data(struct parport *p) {
|
||||
DPRINTK(KERN_DEBUG "parport_splink: read data called\n");
|
||||
unsigned char *io = (unsigned char *) p->base;
|
||||
return *io;
|
||||
}
|
||||
|
||||
static void parport_splink_write_control(struct parport *p, unsigned char d)
|
||||
{
|
||||
const unsigned char wm = (PARPORT_CONTROL_STROBE |
|
||||
PARPORT_CONTROL_AUTOFD |
|
||||
PARPORT_CONTROL_INIT |
|
||||
PARPORT_CONTROL_SELECT);
|
||||
|
||||
DPRINTK(KERN_DEBUG "parport_splink: write control called\n");
|
||||
/* Take this out when drivers have adapted to the newer interface. */
|
||||
if (d & 0x20) {
|
||||
printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
|
||||
p->name, p->cad->name);
|
||||
parport_splink_data_reverse (p);
|
||||
}
|
||||
|
||||
__parport_splink_frob_control (p, wm, d & wm);
|
||||
}
|
||||
|
||||
static unsigned char parport_splink_read_control(struct parport *p)
|
||||
{
|
||||
const unsigned char wm = (PARPORT_CONTROL_STROBE |
|
||||
PARPORT_CONTROL_AUTOFD |
|
||||
PARPORT_CONTROL_INIT |
|
||||
PARPORT_CONTROL_SELECT);
|
||||
DPRINTK(KERN_DEBUG "parport_splink: read control called\n");
|
||||
const struct parport_pc_private *priv = p->physport->private_data;
|
||||
return priv->ctr & wm; /* Use soft copy */
|
||||
}
|
||||
|
||||
static unsigned char parport_splink_frob_control (struct parport *p, unsigned char mask,
|
||||
unsigned char val)
|
||||
{
|
||||
const unsigned char wm = (PARPORT_CONTROL_STROBE |
|
||||
PARPORT_CONTROL_AUTOFD |
|
||||
PARPORT_CONTROL_INIT |
|
||||
PARPORT_CONTROL_SELECT);
|
||||
|
||||
DPRINTK(KERN_DEBUG "parport_splink: frob control called\n");
|
||||
/* Take this out when drivers have adapted to the newer interface. */
|
||||
if (mask & 0x20) {
|
||||
printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
|
||||
p->name, p->cad->name,
|
||||
(val & 0x20) ? "reverse" : "forward");
|
||||
if (val & 0x20)
|
||||
parport_splink_data_reverse (p);
|
||||
else
|
||||
parport_splink_data_forward (p);
|
||||
}
|
||||
|
||||
/* Restrict mask and val to control lines. */
|
||||
mask &= wm;
|
||||
val &= wm;
|
||||
|
||||
return __parport_splink_frob_control (p, mask, val);
|
||||
}
|
||||
|
||||
static unsigned char parport_splink_read_status(struct parport *p)
|
||||
{
|
||||
DPRINTK(KERN_DEBUG "parport_splink: read status called\n");
|
||||
unsigned char *io = (unsigned char *) p->base;
|
||||
return *(io+1);
|
||||
}
|
||||
|
||||
static void parport_splink_inc_use_count(void)
|
||||
{
|
||||
#ifdef MODULE
|
||||
MOD_INC_USE_COUNT;
|
||||
#endif
|
||||
}
|
||||
|
||||
static void parport_splink_dec_use_count(void)
|
||||
{
|
||||
#ifdef MODULE
|
||||
MOD_DEC_USE_COUNT;
|
||||
#endif
|
||||
}
|
||||
|
||||
static struct parport_operations parport_splink_ops =
|
||||
{
|
||||
parport_splink_write_data,
|
||||
parport_splink_read_data,
|
||||
|
||||
parport_splink_write_control,
|
||||
parport_splink_read_control,
|
||||
parport_splink_frob_control,
|
||||
|
||||
parport_splink_read_status,
|
||||
|
||||
parport_splink_enable_irq,
|
||||
parport_splink_disable_irq,
|
||||
|
||||
parport_splink_data_forward,
|
||||
parport_splink_data_reverse,
|
||||
|
||||
parport_splink_init_state,
|
||||
parport_splink_save_state,
|
||||
parport_splink_restore_state,
|
||||
|
||||
parport_splink_inc_use_count,
|
||||
parport_splink_dec_use_count,
|
||||
|
||||
parport_ieee1284_epp_write_data,
|
||||
parport_ieee1284_epp_read_data,
|
||||
parport_ieee1284_epp_write_addr,
|
||||
parport_ieee1284_epp_read_addr,
|
||||
|
||||
parport_ieee1284_ecp_write_data,
|
||||
parport_ieee1284_ecp_read_data,
|
||||
parport_ieee1284_ecp_write_addr,
|
||||
|
||||
parport_ieee1284_write_compat,
|
||||
parport_ieee1284_read_nibble,
|
||||
parport_ieee1284_read_byte,
|
||||
};
|
||||
|
||||
/* --- Initialisation code -------------------------------- */
|
||||
|
||||
static struct parport *parport_splink_probe_port (unsigned long int base)
|
||||
{
|
||||
struct parport_pc_private *priv;
|
||||
struct parport_operations *ops;
|
||||
struct parport *p;
|
||||
|
||||
if (check_mem_region(base, 3)) {
|
||||
printk (KERN_DEBUG "parport (0x%lx): iomem region not available\n", base);
|
||||
return NULL;
|
||||
}
|
||||
priv = kmalloc (sizeof (struct parport_pc_private), GFP_KERNEL);
|
||||
if (!priv) {
|
||||
printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
|
||||
return NULL;
|
||||
}
|
||||
ops = kmalloc (sizeof (struct parport_operations), GFP_KERNEL);
|
||||
if (!ops) {
|
||||
printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
|
||||
base);
|
||||
kfree (priv);
|
||||
return NULL;
|
||||
}
|
||||
memcpy (ops, &parport_splink_ops, sizeof (struct parport_operations));
|
||||
priv->ctr = 0xc;
|
||||
priv->ctr_writable = 0xff;
|
||||
|
||||
if (!(p = parport_register_port(base, PARPORT_IRQ_NONE,
|
||||
PARPORT_DMA_NONE, ops))) {
|
||||
printk (KERN_DEBUG "parport (0x%lx): registration failed!\n",
|
||||
base);
|
||||
kfree (priv);
|
||||
kfree (ops);
|
||||
return NULL;
|
||||
}
|
||||
|
||||
p->modes = PARPORT_MODE_PCSPP | PARPORT_MODE_SAFEININT;
|
||||
p->size = (p->modes & PARPORT_MODE_EPP)?8:3;
|
||||
p->private_data = priv;
|
||||
|
||||
parport_proc_register(p);
|
||||
request_mem_region (p->base, 3, p->name);
|
||||
|
||||
/* Done probing. Now put the port into a sensible start-up state. */
|
||||
parport_splink_write_data(p, 0);
|
||||
parport_splink_data_forward (p);
|
||||
|
||||
/* Now that we've told the sharing engine about the port, and
|
||||
found out its characteristics, let the high-level drivers
|
||||
know about it. */
|
||||
parport_announce_port (p);
|
||||
|
||||
DPRINTK(KERN_DEBUG "parport (0x%lx): init ok!\n",
|
||||
base);
|
||||
return p;
|
||||
}
|
||||
|
||||
static void parport_splink_unregister_port(struct parport *p) {
|
||||
struct parport_pc_private *priv = p->private_data;
|
||||
struct parport_operations *ops = p->ops;
|
||||
|
||||
if (p->irq != PARPORT_IRQ_NONE)
|
||||
free_irq(p->irq, p);
|
||||
release_mem_region(p->base, 3);
|
||||
parport_proc_unregister(p);
|
||||
kfree (priv);
|
||||
parport_unregister_port(p);
|
||||
kfree (ops);
|
||||
}
|
||||
|
||||
|
||||
int parport_splink_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
DPRINTK(KERN_DEBUG "parport_splink init called\n");
|
||||
parport_splink_setup_interrupt();
|
||||
ret = !parport_splink_probe_port(SPLINK_ADDRESS);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
void parport_splink_cleanup(void) {
|
||||
struct parport *p = parport_enumerate(), *tmp;
|
||||
DPRINTK(KERN_DEBUG "parport_splink cleanup called\n");
|
||||
if (p->size) {
|
||||
if (p->modes & PARPORT_MODE_PCSPP) {
|
||||
while(p) {
|
||||
tmp = p->next;
|
||||
parport_splink_unregister_port(p);
|
||||
p = tmp;
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
MODULE_AUTHOR("Nuno Grilo <nuno.grilo@netcabo.pt>");
|
||||
MODULE_DESCRIPTION("Parport Driver for ASUS WL-500g router builtin Port");
|
||||
MODULE_SUPPORTED_DEVICE("ASUS WL-500g builtin Parallel Port");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
module_init(parport_splink_init)
|
||||
module_exit(parport_splink_cleanup)
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Automatically generated by make menuconfig: don't edit
|
||||
#
|
||||
CONFIG_MIPS=y
|
||||
CONFIG_MIPS32=y
|
||||
@ -181,10 +181,6 @@ CONFIG_MTD_PARTITIONS=y
|
||||
# CONFIG_MTD_CONCAT is not set
|
||||
# CONFIG_MTD_REDBOOT_PARTS is not set
|
||||
# CONFIG_MTD_CMDLINE_PARTS is not set
|
||||
|
||||
#
|
||||
# User Modules And Translation Layers
|
||||
#
|
||||
CONFIG_MTD_CHAR=y
|
||||
CONFIG_MTD_BLOCK=y
|
||||
# CONFIG_FTL is not set
|
||||
@ -250,10 +246,6 @@ CONFIG_MTD_SFLASH=y
|
||||
# CONFIG_MTD_SLRAM is not set
|
||||
# CONFIG_MTD_MTDRAM is not set
|
||||
# CONFIG_MTD_BLKMTD is not set
|
||||
|
||||
#
|
||||
# Disk-On-Chip Device Drivers
|
||||
#
|
||||
# CONFIG_MTD_DOC1000 is not set
|
||||
# CONFIG_MTD_DOC2000 is not set
|
||||
# CONFIG_MTD_DOC2001 is not set
|
||||
@ -268,12 +260,8 @@ CONFIG_MTD_SFLASH=y
|
||||
# Parallel port support
|
||||
#
|
||||
CONFIG_PARPORT=m
|
||||
CONFIG_PARPORT_PC=m
|
||||
CONFIG_PARPORT_PC_CML1=m
|
||||
# CONFIG_PARPORT_SERIAL is not set
|
||||
# CONFIG_PARPORT_PC_FIFO is not set
|
||||
# CONFIG_PARPORT_PC_SUPERIO is not set
|
||||
# CONFIG_PARPORT_PC_PCMCIA is not set
|
||||
# CONFIG_PARPORT_PC is not set
|
||||
CONFIG_PARPORT_SPLINK=m
|
||||
# CONFIG_PARPORT_AMIGA is not set
|
||||
# CONFIG_PARPORT_MFC3 is not set
|
||||
# CONFIG_PARPORT_ATARI is not set
|
||||
@ -437,10 +425,6 @@ CONFIG_IP6_NF_TARGET_MARK=m
|
||||
# CONFIG_IP_SCTP is not set
|
||||
# CONFIG_ATM is not set
|
||||
CONFIG_VLAN_8021Q=y
|
||||
|
||||
#
|
||||
#
|
||||
#
|
||||
# CONFIG_IPX is not set
|
||||
# CONFIG_ATALK is not set
|
||||
# CONFIG_DECNET is not set
|
||||
@ -525,20 +509,12 @@ CONFIG_NET_CLS_POLICE=y
|
||||
# SCSI support
|
||||
#
|
||||
CONFIG_SCSI=m
|
||||
|
||||
#
|
||||
# SCSI support type (disk, tape, CD-ROM)
|
||||
#
|
||||
CONFIG_BLK_DEV_SD=m
|
||||
CONFIG_SD_EXTRA_DEVS=5
|
||||
# CONFIG_CHR_DEV_ST is not set
|
||||
# CONFIG_CHR_DEV_OSST is not set
|
||||
# CONFIG_BLK_DEV_SR is not set
|
||||
CONFIG_CHR_DEV_SG=m
|
||||
|
||||
#
|
||||
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
|
||||
#
|
||||
# CONFIG_SCSI_DEBUG_QUEUES is not set
|
||||
# CONFIG_SCSI_MULTI_LUN is not set
|
||||
# CONFIG_SCSI_CONSTANTS is not set
|
||||
@ -780,14 +756,6 @@ CONFIG_PRINTER=m
|
||||
# Joysticks
|
||||
#
|
||||
# CONFIG_INPUT_GAMEPORT is not set
|
||||
|
||||
#
|
||||
# Input core support is needed for gameports
|
||||
#
|
||||
|
||||
#
|
||||
# Input core support is needed for joysticks
|
||||
#
|
||||
# CONFIG_QIC02_TAPE is not set
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
# CONFIG_IPMI_PANIC_EVENT is not set
|
||||
@ -1016,24 +984,12 @@ CONFIG_NLS_DEFAULT="iso8859-1"
|
||||
#
|
||||
CONFIG_USB=m
|
||||
# CONFIG_USB_DEBUG is not set
|
||||
|
||||
#
|
||||
# Miscellaneous USB options
|
||||
#
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
# CONFIG_USB_BANDWIDTH is not set
|
||||
|
||||
#
|
||||
# USB Host Controller Drivers
|
||||
#
|
||||
# CONFIG_USB_EHCI_HCD is not set
|
||||
# CONFIG_USB_UHCI is not set
|
||||
# CONFIG_USB_UHCI_ALT is not set
|
||||
CONFIG_USB_OHCI=m
|
||||
|
||||
#
|
||||
# USB Device Class drivers
|
||||
#
|
||||
# CONFIG_USB_AUDIO is not set
|
||||
# CONFIG_USB_EMI26 is not set
|
||||
# CONFIG_USB_BLUETOOTH is not set
|
||||
@ -1050,15 +1006,7 @@ CONFIG_USB_STORAGE_SDDR55=y
|
||||
CONFIG_USB_STORAGE_JUMPSHOT=y
|
||||
# CONFIG_USB_ACM is not set
|
||||
CONFIG_USB_PRINTER=m
|
||||
|
||||
#
|
||||
# USB Human Interface Devices (HID)
|
||||
#
|
||||
# CONFIG_USB_HID is not set
|
||||
|
||||
#
|
||||
# Input core support is needed for USB HID input layer or HIDBP support
|
||||
#
|
||||
# CONFIG_USB_HIDINPUT is not set
|
||||
# CONFIG_USB_HIDDEV is not set
|
||||
# CONFIG_USB_KBD is not set
|
||||
@ -1067,47 +1015,23 @@ CONFIG_USB_PRINTER=m
|
||||
# CONFIG_USB_WACOM is not set
|
||||
# CONFIG_USB_KBTAB is not set
|
||||
# CONFIG_USB_POWERMATE is not set
|
||||
|
||||
#
|
||||
# USB Imaging devices
|
||||
#
|
||||
# CONFIG_USB_DC2XX is not set
|
||||
# CONFIG_USB_MDC800 is not set
|
||||
# CONFIG_USB_SCANNER is not set
|
||||
# CONFIG_USB_MICROTEK is not set
|
||||
# CONFIG_USB_HPUSBSCSI is not set
|
||||
|
||||
#
|
||||
# USB Multimedia devices
|
||||
#
|
||||
|
||||
#
|
||||
# Video4Linux support is needed for USB Multimedia device support
|
||||
#
|
||||
|
||||
#
|
||||
# USB Network adaptors
|
||||
#
|
||||
# CONFIG_USB_PEGASUS is not set
|
||||
# CONFIG_USB_RTL8150 is not set
|
||||
# CONFIG_USB_KAWETH is not set
|
||||
# CONFIG_USB_CATC is not set
|
||||
# CONFIG_USB_CDCETHER is not set
|
||||
# CONFIG_USB_USBNET is not set
|
||||
|
||||
#
|
||||
# USB port drivers
|
||||
#
|
||||
# CONFIG_USB_USS720 is not set
|
||||
|
||||
#
|
||||
# USB Serial Converter support
|
||||
#
|
||||
# CONFIG_USB_SERIAL is not set
|
||||
|
||||
#
|
||||
# USB Miscellaneous drivers
|
||||
#
|
||||
# CONFIG_USB_RIO500 is not set
|
||||
# CONFIG_USB_AUERSWALD is not set
|
||||
# CONFIG_USB_TIGL is not set
|
||||
|
||||
Loading…
Reference in New Issue
Block a user