lantiq: remove gr7000 support

this seems to have never worked as the wrong SoC is selected

Signed-off-by: John Crispin <john@phrozen.org>

target/linux/lantiq/base-files/etc/board.d/02_network

@@ -76,10 +76,6 @@ FRITZ7360SL)
 		"4:lan:1" "2:lan:2" "0:lan:3" "1:lan:4" "6t@eth0"
 	;;
 
-GR7000)
-	ucidef_set_interface_wan "eth0"
-	;;
-
 H201L)
 	ucidef_add_switch "switch0" \
 		"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4t@eth0"

target/linux/lantiq/dts/GR7000.dts

@@ -1,149 +0,0 @@
-/dts-v1/;
-
-/include/ "ar9.dtsi"
-
-/ {
-	model = "GR7000 - Aztech GR7000";
-
-	chosen {
-		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
-
-		leds {
-			boot = &power_red;
-			failsafe = &power_red;
-
-			internet = &internet_green;
-			usb = &usb;
-			wifi = &wifi;
-		};
-	};
-
-	memory@0 {
-		reg = <0x0 0x2000000>;
-	};
-
-	fpi@10000000 {
-		localbus@0 {
-			nor-boot@0 {
-				compatible = "lantiq,nor";
-				bank-width = <2>;
-				reg = <0 0x0 0x2000000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					partition@0 {
-						label = "uboot";
-						reg = <0x0 0x20000>;
-						read-only;
-					};
-
-					partition@20000 {
-						label = "uboot_env";
-						reg = <0x20000 0x10000>;
-						read-only;
-					};
-
-					partition@30000 {
-						label = "firmware";
-						reg = <0x30000 0x7d0000>;
-					};
-				};
-			};
-		};
-
-		gpio: pinmux@E100B10 {
-			compatible = "lantiq,pinctrl-xr9";
-			pinctrl-names = "default";
-			pinctrl-0 = <&state_default>;
-
-			state_default: pinmux {
-				stp {
-					lantiq,groups = "stp";
-					lantiq,function = "stp";
-				};
-				pci-in {
-					lantiq,groups = "req1";
-					lantiq,output = <0>;
-					lantiq,open-drain = <1>;
-					lantiq,pull = <2>;
-				};
-				pci-out {
-					lantiq,groups = "gnt1";
-					lantiq,output = <1>;
-					lantiq,pull = <0>;
-				};
-				pci_rst {
-					lantiq,pins = "io21";
-					lantiq,pull = <0>;
-					lantiq,output = <1>;
-				};
-			};
-		};
-
-		ifxhcd@E101000 {
-			status = "okay";
-		};
-
-		pci@E105400 {
-			status = "okay";
-		};
-
-		stp: stp@E100BB0 {
-			compatible = "lantiq,gpio-stp-xway";
-			#gpio-cells = <2>;
-			gpio-controller;
-			reg = <0xE100BB0 0x40>;
-
-			lantiq,shadow = <0xfff>;
-			lantiq,groups = <0x3>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&gpio 53 1>;
-			linux,code = <0x198>;
-		};
-		wps {
-			label = "wps";
-			gpios = <&gpio 54 1>;
-			linux,code = <0x211>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-
-		power_red: power2 {
-			label = "gr7000:red:power";
-			gpios = <&stp 4 0>;
-		};
-		internet_green: internet {
-			label = "gr7000:green:internet";
-			gpios = <&stp 2 1>;
-		};
-		internet2 {
-			label = "gr7000:red:internet";
-			gpios = <&stp 3 1>;
-		};
-		usb: usb {
-			label = "gr7000:green:usb";
-			gpios = <&stp 10 1>;
-		};
-		wifi: wifi {
-			label = "gr7000:green:wireless";
-			gpios = <&stp 15 1>;
-		};
-	};
-};

target/linux/lantiq/image/Makefile

@@ -561,14 +561,6 @@ define LegacyDevice/FRITZ7320
 endef
 LEGACY_DEVICES += FRITZ7320
 
-define Device/GR7000
-  DEVICE_PROFILE := GR7000
-  IMAGE_SIZE := 7808k
-  DEVICE_TITLE := Aztech GR7000
-  DEVICE_PACKAGES := kmod-ltq-deu-ar9 kmod-usb-dwc2 swconfig
-endef
-TARGET_DEVICES += GR7000
-
 define Device/H201L
   DEVICE_PROFILE := H201L
   IMAGE_SIZE := 7808k