ramips: add support for Buffalo WSR-2533DHPL
Buffalo WSR-2533DHPL is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R (2x MediaTek MT7615N) - Ethernet : 10/100/1000 Mbps - Switch : MediaTek MT7530 (SoC) - LED/keys : 8x/6x (3x buttons, 2x slide-switches) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX from triangle-mark - 57600n8 - Power : 12VDC 1.5A Flash instruction using initramfs image: 1. prepare the TFTP server with the initramfs image renamed to "linux.trx-recovery" and IP address "192.168.11.2" 2. press the "AOSS" button while powering on the WSR-2533DHPL 3. after 10 seconds, release the "AOSS" button, WSR-2533DHPL downloads the initramfs image and boot with it automatically 4. on the initramfs image, download the sysupgrade image to the device and perform sysupgrade with it 5. wait ~120 seconds to complete flashing Switch position overview: - slide-switch1 (2x positions) - "AUTO" - "MANUAL" (not connected to gpio) - slide-switch2 (3x positions) - "ROUTER" - "AP" (not connected to gpio) - "WB" Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [add note on switches, fix group->groups for state_default] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
This commit is contained in:
INAGAKI Hiroshi
Adrian Schmutzler
parent
c459a6bf48
commit
e8787291b3
236
target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhpl.dts
Normal file
236
target/linux/ramips/dts/mt7621_buffalo_wsr-2533dhpl.dts
Normal file
@ -0,0 +1,236 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "buffalo,wsr-2533dhpl", "mediatek,mt7621-soc";
|
||||
model = "Buffalo WSR-2533DHPL";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_diag;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
label-mac-device = &gmac0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,57600";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
internet_green {
|
||||
label = "wsr-2533dhpl:green:internet";
|
||||
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_green {
|
||||
label = "wsr-2533dhpl:green:router";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
router_amber {
|
||||
label = "wsr-2533dhpl:amber:router";
|
||||
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
internet_amber {
|
||||
label = "wsr-2533dhpl:amber:internet";
|
||||
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wireless_amber {
|
||||
label = "wsr-2533dhpl:amber:wireless";
|
||||
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power: power {
|
||||
label = "wsr-2533dhpl:green:power";
|
||||
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_diag: diag {
|
||||
label = "wsr-2533dhpl:amber:diag";
|
||||
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wireless_green {
|
||||
label = "wsr-2533dhpl:green:wireless";
|
||||
gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
aoss {
|
||||
label = "aoss";
|
||||
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
auto {
|
||||
label = "auto";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
bridge {
|
||||
label = "wb";
|
||||
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
router {
|
||||
label = "router";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <BTN_1>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
|
||||
power {
|
||||
label = "power";
|
||||
gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_POWER>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <40000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x30000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@30000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x30000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@40000 {
|
||||
label = "factory";
|
||||
reg = <0x40000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "openwrt,trx";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x7c0000>;
|
||||
};
|
||||
|
||||
partition@810000 {
|
||||
label = "Kernel2";
|
||||
reg = <0x810000 0x7c0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fd0000 {
|
||||
label = "glbcfg";
|
||||
reg = <0xfd0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
label = "board_data";
|
||||
reg = <0xfe0000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
mtd-mac-address = <&factory 0x4>;
|
||||
mtd-mac-address-increment = <(-1)>;
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@0 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x8000>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "uart2", "uart3", "wdt", "sdhci";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
@ -196,6 +196,15 @@ define Device/buffalo_wsr-1166dhp
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wsr-1166dhp
|
||||
|
||||
define Device/buffalo_wsr-2533dhpl
|
||||
IMAGE_SIZE := 7936k
|
||||
DEVICE_VENDOR := Buffalo
|
||||
DEVICE_MODEL := WSR-2533DHPL
|
||||
IMAGE/sysupgrade.bin := trx | pad-rootfs | append-metadata
|
||||
DEVICE_PACKAGES := kmod-mt7615e wpad-basic
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wsr-2533dhpl
|
||||
|
||||
define Device/buffalo_wsr-600dhp
|
||||
IMAGE_SIZE := 16064k
|
||||
DEVICE_VENDOR := Buffalo
|
||||
|
||||
Loading…
Reference in New Issue
Block a user